Schaller humimeter GF2 - Moisture meter for concrete and drywall
Gambar Produk
Schaller humimeter GF2 - Moisture meter for concrete and drywall
Kategori
Update Terakhir
07 / 03 / 2024
Minimum Pembelian
1 Unit
Dilihat Sebanyak
3 Kali
Harga
CALL
Bagikan
+ Keranjang
Spesifikasi Schaller humimeter GF2 - Moisture meter for concrete and drywall
Cari berbagai macam dari pilihan terlengkap Alat Laboratorium Mikrobiologi. Cari penawaran terbaik dan termurah dari supplier terlengkap di Indonetwork.
Alat Laboratorium Mikrobiologi
Deskripsi produk
humimeter GF2 - Moisture meter for concrete and drywall
Professional moisture meter for buildings, walls and floors
Measurement of moisture in screed, drywall, concrete and other building materials for walls and floors
moisture meter for home inspection
Many sensors for a wide range of applications
non-destructive moisture measurement
Easy to handle
Measurement within a few seconds
Lifetime Support
Features
Professional moisture meter humimeter GF2
Thanks to a large number of sensors, the GF2 moisture meter enables many measurements: residual moisture and readiness for covering of concrete, moisture of building materials such as drywall, wood, concrete and bricks - as well as humidity and temperature.
Areas of application of the versatile moisture meter for buildings, walls and floors:
Since the humimeter GF2 is intended for professionals, the device covers many areas of application and is also the perfect alternative to the time-consuming CM measurement, because even large screed areas can be examined in just a few minutes:
Determine the readiness for covering (degree of drying) of the screed (e.g. for parquet flooring).
Inspection of damp spots, e.g. in masonry, insulation, wood, drywall, concrete
Measurement of surface temperature (infrared)
Measurement of humidity and temperature
Measure wood moisture
Simply measure the readiness for covering and the moisture content of the screed:
The humimeter GF2 is an excellent moisture meter for screeds. It enables a quick and accurate check of the readiness for covering of screed and other building materials. With the capacitive moisture sensor built into the measuring device, a representative point for carrying out a CRH or CM measurement can be found in a very short time by means of a grid measurement, in order to then check the readiness for covering. The measuring device also uses the CRH method (CRH = corresponding relative humidity) to measure the dryness of the screed.
In addition to being able to measure the screed moisture, the measuring device is also suitable for determining the moisture in drywall and other building materials. On the underside of the device is a capacitive moisture sensor for non-destructive measurement of concrete, screed, plasterboard, aerated concrete (Ytong), concrete bricks, clinker bricks, insulating materials and much more. installed.
The capacitive sensor is ideally suited for monitoring drying processes in new buildings or during renovation work or for determining damp spots, e.g. leaks, wall or floor moisture.
GF2 offers a real alternative to CM measurement (calcium carbide method)
The CM measurement is still widely used in the construction industry. On the one hand, the CM measurement is expensive because it is time-consuming and impractical to use. On the other hand, only a small selective area can be examined with the CM measurement. Another factor is the inaccuracy of the CM measurement: different screed recipes, additives and chemicals sometimes have a strong influence on the CM measurement.
To avoid all these problems, the humimeter GF2 construction moisture meter developed to determine the moisture in the screed. The fast and non-destructive measurement enables a large area to be examined in a short time. In this way, entire single-family houses can be measured non-destructively at many measuring points in just a few minutes - room by room.
If a CM measurement is nevertheless required, a combination of the two measurement methods can be used: using a grid measurement, the GF2 can be used to determine a representative point for carrying out the required CM measurement in a very short time.
The measuring device is adjusted according to Kascalestion to the reference method EN ISO 12570.
The humimeter GF2 supports numerous measurement statistics for building moisture, air humidity, room climate, dew point, equilibrium moisture content, air and surface temperature as well as long-term recording of climate data including material moisture sensor. This requires external humidity, temperature and IR temperature sensors as well as computer software for archiving the data and graphically displaying climate records.
Expandable with numerous sensors for humidity and temperature measurement:
In addition to the integrated capacitive sensor for non-destructive moisture measurement, a large number of sensors can be connected:
Humidity and temperature sensor
Humidity and temperature sensors
Precision humidity & temperature probe
IR temperature sensor: for measuring the surface temperature of various materials
Hand electrode: a conductance sensor for measuring gypsum, plaster, lime plaster, lime-cement plaster, cork, cellulose insulation, fill and many other materials. Likewise, the moisture or wood moisture can be measured precisely. Possible applications are, for example, construction timber, split logs, chipboard or OSB panels.
Plug-in pair of electrodes for determining the water content of hard, set building materials
Ram electrode: Measurement to depths of 60mm.
Flat electrodes: measure the moisture of the fill under the screed
FAQ:
What are the advantages of the KRL method?
Regardless of whether cement screed or calcium sulphate screed or anhydrite screed - with the KRL method or in other words by referring to the equilibrium moisture content between air and screed, the residual moisture in the screed can be measured most precisely and continuously. This saves time and costs.
How does capacitive humidity measurement work?
Capacitive humidity measurement is based on measuring the electrical capacity between two electrodes. When a material becomes wet, its capacitance changes because moisture has a higher dielectric constant than the material itself.
What is the advantage of capacitive measurement compared to CM measurement?
The moisture measurement is non-destructive, since no holes are necessary in the screed and underfloor heating is not endangered. Therefore, capacitive measurement is faster and cheaper. In addition, no chemicals such as calcium carbide are used.
How quickly can I get my result?
With the CM measurement, material must first be knocked out of the screed and it takes about 20 minutes for a measured value to be available.
With capacitive humidity measurement, the measuring device is positioned at the point to be measured Screed pressed and the measured value is displayed immediately.
With the KRL method, an adjustment period of approx. 5 minutes must be waited for in order to carry out a correct measurement.
Benefits
easy to use
versatile professional tool
suitable for home inspection
Measurement within seconds
fast determination of average values
Robust design
Lifetime Support
Technical data
Measuring range
0 to 20% water content
Resolution
0,1% water content
Measuring depth
30 mm
Temperature compensation
Automatically
Measurement result
Within seconds without sample preparation
Memory function
Hold function, manual value added storage
Automatic datalog
Datalog for 10.000 values with measuring point report
Dimensions
147 x 75 x 30 mm
Weight
265 g (including batteries)
Power Supply
4 x 1,5 Volt AA Alkaline batteries
Menu languages
English, German, French, Italian, Spanish, Russian, Portuguese, Czech, Polish and International
Further information
Folder humimeter GF2
Instruction manual humimeter GF2
Florian Postl
Head of Sales and Product Management
Do you have any questions about our products? I would be happy to advise you personally!
Your advice
Features
Professional moisture meter humimeter GF2
Thanks to a large number of sensors, the GF2 moisture meter enables many measurements: residual moisture and readiness for covering of concrete, moisture of building materials such as drywall, wood, concrete and bricks - as well as humidity and temperature.
Areas of application of the versatile moisture meter for buildings, walls and floors:
Since the humimeter GF2 is intended for professionals, the device covers many areas of application and is also the perfect alternative to the time-consuming CM measurement, because even large screed areas can be examined in just a few minutes:
Determine the readiness for covering (degree of drying) of the screed (e.g. for parquet flooring).
Inspection of damp spots, e.g. in masonry, insulation, wood, drywall, concrete
Measurement of surface temperature (infrared)
Measurement of humidity and temperature
Measure wood moisture
Simply measure the readiness for covering and the moisture content of the screed:
The humimeter GF2 is an excellent moisture meter for screeds. It enables a quick and accurate check of the readiness for covering of screed and other building materials. With the capacitive moisture sensor built into the measuring device, a representative point for carrying out a CRH or CM measurement can be found in a very short time by means of a grid measurement, in order to then check the readiness for covering. The measuring device also uses the CRH method (CRH = corresponding relative humidity) to measure the dryness of the screed.
In addition to being able to measure the screed moisture, the measuring device is also suitable for determining the moisture in drywall and other building materials. On the underside of the device is a capacitive moisture sensor for non-destructive measurement of concrete, screed, plasterboard, aerated concrete (Ytong), concrete bricks, clinker bricks, insulating materials and much more. installed.
The capacitive sensor is ideally suited for monitoring drying processes in new buildings or during renovation work or for determining damp spots, e.g. leaks, wall or floor moisture.
GF2 offers a real alternative to CM measurement (calcium carbide method)
The CM measurement is still widely used in the construction industry. On the one hand, the CM measurement is expensive because it is time-consuming and impractical to use. On the other hand, only a small selective area can be examined with the CM measurement. Another factor is the inaccuracy of the CM measurement: different screed recipes, additives and chemicals sometimes have a strong influence on the CM measurement.
To avoid all these problems, the humimeter GF2 construction moisture meter developed to determine the moisture in the screed. The fast and non-destructive measurement enables a large area to be examined in a short time. In this way, entire single-family houses can be measured non-destructively at many measuring points in just a few minutes - room by room.
If a CM measurement is nevertheless required, a combination of the two measurement methods can be used: using a grid measurement, the GF2 can be used to determine a representative point for carrying out the required CM measurement in a very short time.
The measuring device is adjusted according to Kascalestion to the reference method EN ISO 12570.
The humimeter GF2 supports numerous measurement statistics for building moisture, air humidity, room climate, dew point, equilibrium moisture content, air and surface temperature as well as long-term recording of climate data including material moisture sensor. This requires external humidity, temperature and IR temperature sensors as well as computer software for archiving the data and graphically displaying climate records.
Expandable with numerous sensors for humidity and temperature measurement:
In addition to the integrated capacitive sensor for non-destructive moisture measurement, a large number of sensors can be connected:
Humidity and temperature sensor
Humidity and temperature sensors
Precision humidity & temperature probe
IR temperature sensor: for measuring the surface temperature of various materials
Hand electrode: a conductance sensor for measuring gypsum, plaster, lime plaster, lime-cement plaster, cork, cellulose insulation, fill and many other materials. Likewise, the moisture or wood moisture can be measured precisely. Possible applications are, for example, construction timber, split logs, chipboard or OSB panels.
Plug-in pair of electrodes for determining the water content of hard, set building materials
Ram electrode: Measurement to depths of 60mm.
Flat electrodes: measure the moisture of the fill under the screed
FAQ:
What are the advantages of the KRL method?
Regardless of whether cement screed or calcium sulphate screed or anhydrite screed - with the KRL method or in other words by referring to the equilibrium moisture content between air and screed, the residual moisture in the screed can be measured most precisely and continuously. This saves time and costs.
How does capacitive humidity measurement work?
Capacitive humidity measurement is based on measuring the electrical capacity between two electrodes. When a material becomes wet, its capacitance changes because moisture has a higher dielectric constant than the material itself.
What is the advantage of capacitive measurement compared to CM measurement?
The moisture measurement is non-destructive, since no holes are necessary in the screed and underfloor heating is not endangered. Therefore, capacitive measurement is faster and cheaper. In addition, no chemicals such as calcium carbide are used.
How quickly can I get my result?
With the CM measurement, material must first be knocked out of the screed and it takes about 20 minutes for a measured value to be available.
With capacitive humidity measurement, the measuring device is positioned at the point to be measured Screed pressed and the measured value is displayed immediately.
With the KRL method, an adjustment period of approx. 5 minutes must be waited for in order to carry out a correct measurement.
Benefits
easy to use
versatile professional tool
suitable for home inspection
Measurement within seconds
fast determination of average values
Robust design
Lifetime Support
Technical data
Measuring range
0 to 20% water content
Resolution
0,1% water content
Measuring depth
30 mm
Temperature compensation
Automatically
Measurement result
Within seconds without sample preparation
Memory function
Hold function, manual value added storage
Automatic datalog
Datalog for 10.000 values with measuring point report
Dimensions
147 x 75 x 30 mm
Weight
265 g (including batteries)
Power Supply
4 x 1,5 Volt AA Alkaline batteries
Menu languages
English, German, French, Italian, Spanish, Russian, Portuguese, Czech, Polish and International
Further information
Folder humimeter GF2
Instruction manual humimeter GF2
Hubungi :
Juni Tarigan (Mr.)
0811 198 0702
Pera (Ms.)
0811 3801 0819
Admin
0813-2310-201
PT. ANDALAN BANGUN SEJAHTERA
Jl. Sumur Batu No. 1, Kemayoran
Jakarta Pusat - Indonesia 10640
Telp : +6221-42803207, 4227517
Fax : +6221-42803208
Deskripsi produk
humimeter GF2 - Moisture meter for concrete and drywall
Professional moisture meter for buildings, walls and floors
Measurement of moisture in screed, drywall, concrete and other building materials for walls and floors
moisture meter for home inspection
Many sensors for a wide range of applications
non-destructive moisture measurement
Easy to handle
Measurement within a few seconds
Lifetime Support
Features
Professional moisture meter humimeter GF2
Thanks to a large number of sensors, the GF2 moisture meter enables many measurements: residual moisture and readiness for covering of concrete, moisture of building materials such as drywall, wood, concrete and bricks - as well as humidity and temperature.
Areas of application of the versatile moisture meter for buildings, walls and floors:
Since the humimeter GF2 is intended for professionals, the device covers many areas of application and is also the perfect alternative to the time-consuming CM measurement, because even large screed areas can be examined in just a few minutes:
Determine the readiness for covering (degree of drying) of the screed (e.g. for parquet flooring).
Inspection of damp spots, e.g. in masonry, insulation, wood, drywall, concrete
Measurement of surface temperature (infrared)
Measurement of humidity and temperature
Measure wood moisture
Simply measure the readiness for covering and the moisture content of the screed:
The humimeter GF2 is an excellent moisture meter for screeds. It enables a quick and accurate check of the readiness for covering of screed and other building materials. With the capacitive moisture sensor built into the measuring device, a representative point for carrying out a CRH or CM measurement can be found in a very short time by means of a grid measurement, in order to then check the readiness for covering. The measuring device also uses the CRH method (CRH = corresponding relative humidity) to measure the dryness of the screed.
In addition to being able to measure the screed moisture, the measuring device is also suitable for determining the moisture in drywall and other building materials. On the underside of the device is a capacitive moisture sensor for non-destructive measurement of concrete, screed, plasterboard, aerated concrete (Ytong), concrete bricks, clinker bricks, insulating materials and much more. installed.
The capacitive sensor is ideally suited for monitoring drying processes in new buildings or during renovation work or for determining damp spots, e.g. leaks, wall or floor moisture.
GF2 offers a real alternative to CM measurement (calcium carbide method)
The CM measurement is still widely used in the construction industry. On the one hand, the CM measurement is expensive because it is time-consuming and impractical to use. On the other hand, only a small selective area can be examined with the CM measurement. Another factor is the inaccuracy of the CM measurement: different screed recipes, additives and chemicals sometimes have a strong influence on the CM measurement.
To avoid all these problems, the humimeter GF2 construction moisture meter developed to determine the moisture in the screed. The fast and non-destructive measurement enables a large area to be examined in a short time. In this way, entire single-family houses can be measured non-destructively at many measuring points in just a few minutes - room by room.
If a CM measurement is nevertheless required, a combination of the two measurement methods can be used: using a grid measurement, the GF2 can be used to determine a representative point for carrying out the required CM measurement in a very short time.
The measuring device is adjusted according to Kascalestion to the reference method EN ISO 12570.
The humimeter GF2 supports numerous measurement statistics for building moisture, air humidity, room climate, dew point, equilibrium moisture content, air and surface temperature as well as long-term recording of climate data including material moisture sensor. This requires external humidity, temperature and IR temperature sensors as well as computer software for archiving the data and graphically displaying climate records.
Expandable with numerous sensors for humidity and temperature measurement:
In addition to the integrated capacitive sensor for non-destructive moisture measurement, a large number of sensors can be connected:
Humidity and temperature sensor
Humidity and temperature sensors
Precision humidity & temperature probe
IR temperature sensor: for measuring the surface temperature of various materials
Hand electrode: a conductance sensor for measuring gypsum, plaster, lime plaster, lime-cement plaster, cork, cellulose insulation, fill and many other materials. Likewise, the moisture or wood moisture can be measured precisely. Possible applications are, for example, construction timber, split logs, chipboard or OSB panels.
Plug-in pair of electrodes for determining the water content of hard, set building materials
Ram electrode: Measurement to depths of 60mm.
Flat electrodes: measure the moisture of the fill under the screed
FAQ:
What are the advantages of the KRL method?
Regardless of whether cement screed or calcium sulphate screed or anhydrite screed - with the KRL method or in other words by referring to the equilibrium moisture content between air and screed, the residual moisture in the screed can be measured most precisely and continuously. This saves time and costs.
How does capacitive humidity measurement work?
Capacitive humidity measurement is based on measuring the electrical capacity between two electrodes. When a material becomes wet, its capacitance changes because moisture has a higher dielectric constant than the material itself.
What is the advantage of capacitive measurement compared to CM measurement?
The moisture measurement is non-destructive, since no holes are necessary in the screed and underfloor heating is not endangered. Therefore, capacitive measurement is faster and cheaper. In addition, no chemicals such as calcium carbide are used.
How quickly can I get my result?
With the CM measurement, material must first be knocked out of the screed and it takes about 20 minutes for a measured value to be available.
With capacitive humidity measurement, the measuring device is positioned at the point to be measured Screed pressed and the measured value is displayed immediately.
With the KRL method, an adjustment period of approx. 5 minutes must be waited for in order to carry out a correct measurement.
Benefits
easy to use
versatile professional tool
suitable for home inspection
Measurement within seconds
fast determination of average values
Robust design
Lifetime Support
Technical data
Measuring range
0 to 20% water content
Resolution
0,1% water content
Measuring depth
30 mm
Temperature compensation
Automatically
Measurement result
Within seconds without sample preparation
Memory function
Hold function, manual value added storage
Automatic datalog
Datalog for 10.000 values with measuring point report
Dimensions
147 x 75 x 30 mm
Weight
265 g (including batteries)
Power Supply
4 x 1,5 Volt AA Alkaline batteries
Menu languages
English, German, French, Italian, Spanish, Russian, Portuguese, Czech, Polish and International
Further information
Folder humimeter GF2
Instruction manual humimeter GF2
Florian Postl
Head of Sales and Product Management
Do you have any questions about our products? I would be happy to advise you personally!
Your advice
Features
Professional moisture meter humimeter GF2
Thanks to a large number of sensors, the GF2 moisture meter enables many measurements: residual moisture and readiness for covering of concrete, moisture of building materials such as drywall, wood, concrete and bricks - as well as humidity and temperature.
Areas of application of the versatile moisture meter for buildings, walls and floors:
Since the humimeter GF2 is intended for professionals, the device covers many areas of application and is also the perfect alternative to the time-consuming CM measurement, because even large screed areas can be examined in just a few minutes:
Determine the readiness for covering (degree of drying) of the screed (e.g. for parquet flooring).
Inspection of damp spots, e.g. in masonry, insulation, wood, drywall, concrete
Measurement of surface temperature (infrared)
Measurement of humidity and temperature
Measure wood moisture
Simply measure the readiness for covering and the moisture content of the screed:
The humimeter GF2 is an excellent moisture meter for screeds. It enables a quick and accurate check of the readiness for covering of screed and other building materials. With the capacitive moisture sensor built into the measuring device, a representative point for carrying out a CRH or CM measurement can be found in a very short time by means of a grid measurement, in order to then check the readiness for covering. The measuring device also uses the CRH method (CRH = corresponding relative humidity) to measure the dryness of the screed.
In addition to being able to measure the screed moisture, the measuring device is also suitable for determining the moisture in drywall and other building materials. On the underside of the device is a capacitive moisture sensor for non-destructive measurement of concrete, screed, plasterboard, aerated concrete (Ytong), concrete bricks, clinker bricks, insulating materials and much more. installed.
The capacitive sensor is ideally suited for monitoring drying processes in new buildings or during renovation work or for determining damp spots, e.g. leaks, wall or floor moisture.
GF2 offers a real alternative to CM measurement (calcium carbide method)
The CM measurement is still widely used in the construction industry. On the one hand, the CM measurement is expensive because it is time-consuming and impractical to use. On the other hand, only a small selective area can be examined with the CM measurement. Another factor is the inaccuracy of the CM measurement: different screed recipes, additives and chemicals sometimes have a strong influence on the CM measurement.
To avoid all these problems, the humimeter GF2 construction moisture meter developed to determine the moisture in the screed. The fast and non-destructive measurement enables a large area to be examined in a short time. In this way, entire single-family houses can be measured non-destructively at many measuring points in just a few minutes - room by room.
If a CM measurement is nevertheless required, a combination of the two measurement methods can be used: using a grid measurement, the GF2 can be used to determine a representative point for carrying out the required CM measurement in a very short time.
The measuring device is adjusted according to Kascalestion to the reference method EN ISO 12570.
The humimeter GF2 supports numerous measurement statistics for building moisture, air humidity, room climate, dew point, equilibrium moisture content, air and surface temperature as well as long-term recording of climate data including material moisture sensor. This requires external humidity, temperature and IR temperature sensors as well as computer software for archiving the data and graphically displaying climate records.
Expandable with numerous sensors for humidity and temperature measurement:
In addition to the integrated capacitive sensor for non-destructive moisture measurement, a large number of sensors can be connected:
Humidity and temperature sensor
Humidity and temperature sensors
Precision humidity & temperature probe
IR temperature sensor: for measuring the surface temperature of various materials
Hand electrode: a conductance sensor for measuring gypsum, plaster, lime plaster, lime-cement plaster, cork, cellulose insulation, fill and many other materials. Likewise, the moisture or wood moisture can be measured precisely. Possible applications are, for example, construction timber, split logs, chipboard or OSB panels.
Plug-in pair of electrodes for determining the water content of hard, set building materials
Ram electrode: Measurement to depths of 60mm.
Flat electrodes: measure the moisture of the fill under the screed
FAQ:
What are the advantages of the KRL method?
Regardless of whether cement screed or calcium sulphate screed or anhydrite screed - with the KRL method or in other words by referring to the equilibrium moisture content between air and screed, the residual moisture in the screed can be measured most precisely and continuously. This saves time and costs.
How does capacitive humidity measurement work?
Capacitive humidity measurement is based on measuring the electrical capacity between two electrodes. When a material becomes wet, its capacitance changes because moisture has a higher dielectric constant than the material itself.
What is the advantage of capacitive measurement compared to CM measurement?
The moisture measurement is non-destructive, since no holes are necessary in the screed and underfloor heating is not endangered. Therefore, capacitive measurement is faster and cheaper. In addition, no chemicals such as calcium carbide are used.
How quickly can I get my result?
With the CM measurement, material must first be knocked out of the screed and it takes about 20 minutes for a measured value to be available.
With capacitive humidity measurement, the measuring device is positioned at the point to be measured Screed pressed and the measured value is displayed immediately.
With the KRL method, an adjustment period of approx. 5 minutes must be waited for in order to carry out a correct measurement.
Benefits
easy to use
versatile professional tool
suitable for home inspection
Measurement within seconds
fast determination of average values
Robust design
Lifetime Support
Technical data
Measuring range
0 to 20% water content
Resolution
0,1% water content
Measuring depth
30 mm
Temperature compensation
Automatically
Measurement result
Within seconds without sample preparation
Memory function
Hold function, manual value added storage
Automatic datalog
Datalog for 10.000 values with measuring point report
Dimensions
147 x 75 x 30 mm
Weight
265 g (including batteries)
Power Supply
4 x 1,5 Volt AA Alkaline batteries
Menu languages
English, German, French, Italian, Spanish, Russian, Portuguese, Czech, Polish and International
Further information
Folder humimeter GF2
Instruction manual humimeter GF2
Hubungi :
Juni Tarigan (Mr.)
0811 198 0702
Pera (Ms.)
0811 3801 0819
Admin
0813-2310-201
PT. ANDALAN BANGUN SEJAHTERA
Jl. Sumur Batu No. 1, Kemayoran
Jakarta Pusat - Indonesia 10640
Telp : +6221-42803207, 4227517
Fax : +6221-42803208
PT. ANDALAN BANGUN SEJAHTERA
Penjelasan Ringkas : PT. ANDALAN BANGUN SEJAHTERA Jl. Sumur Batu Raya no. 1 Kemayoran Jakarta Pusat Indonesia - 10640 Telp : 021 - 42803207, 4227517 Fax : 021 - 42803208 Contact Person : Marketing : email : sales@andalanbangun.com Marketing : Bpk Juni Mobile : +62811 198 0702 Kami menyediakan alat-alat laboratorium & Intrument untuk berbagai keperluan dan kebutuhan dari berbagai merek alat-alat laboratorium berupa: Microbiology, Chemical and Reagent, Laboratory and Scientific Equipment, Medical Equipment, dan Glassware. Product : HACH, MEMMERT, OHAUS, KETT, KERN, TAKEMURA, EPPENDORF, BOECO, JULABO, CORNING, AXYGEN, PYREX, IWAKI, WHATMAN, SOCOREX, BRAND, IKA, ADVANTEC, DIFCO, MERCK CHEMICAL, SIGMA ALDRICH, DURAN, LOVIBOND, INTERSCIENCE, SEWARD, HETTICH, METTLER TOLEDO, ALL AMERICAN, ATAGO, AZ Instrument, BROOKFIELD, CRITERION, EXTECH, FUNKE GERBER, GEMMY, GFL, GILSON, HANNA, HIRAYAMA, RION, USBECK, GOSSELIN, DAIHAN LABTECH, THERMOSSCEINTIFIC, etc., • GENERAL LAB PRODUCT : BEAKERS - Plastic Beaker - Glass Beaker BOTTLES - Aspirator Bottle - BOD Bottle - Round Bottle - Media Bottle - Reagent Bottle - Sample Bottle - Serum Bottle - Specimen Bottle - Universal Bottle - Wash Bottle CRUCIBLES - Porcelain Crucibles - Silica Crucibles - Platinum Crucibles - Crucible Tong DESICATORS - Desiccators ( Non-Vacuum) - Desiccators ( Vacuum) FUNNELS - Powder Funnels - Utility Funnels - Buchner Funnels - Separating Funnels FLASKS - Baffled Shake Flask - Conical Flask - Dewar Flask - Distillation Flask - Filtering Flask - Flat Bottom Flask - Iodine Flask - Kjeldahl Flask - Round Bottom Flask - Tissue Culture Flask - Volumetric Flask MEASURING CYLINDERS - Plastic Measuring Cyclinder - Glass Measuring Cyclinder PIPETTES - Pasteur Pipette - Transfer Pipette - Measuring Pipette - Volumetric Pipette - Micropipette - Pipette Filler TUBES & VIALS - Capillary Tubes - Centrifuge Tubes - Cryo Tubes - Culture Test Tubes - Durham Tubes - Nessler Tubes - Specimen Tubes - Test Tubes - Scintillation Vials - Others Vials TUBING & CONNECTORS - Tubing Connectors - Rubber Tubing - Silicone Tubing - Teflon Tubing STOPPERS - Cork Stopper - Rubber Stopper - Silicone Stopper - Steristopper - Teflon Stopper SYRINGES - Plastic Syringes - Glass Syringes - Micro Syringes - Syringe Filters PETRI DISHES - Plastic Petri Dish - Glass Petri Dish - Moisture Dish BURETTES - Glass Burettes - Automatic Burretes - Bottle-Top Burettes - Micro Burretes FILTER PAPERS & MEMBRANCES - Cellulose Filters - Glass Microfiber Filters - Membrane Filters INDICATOR PAPERS - Litmus Papers - Cobalt Chloride Paper - pH Paper - Universal Indicator Paper MEASURING INSTRUMENTS - Micrometers - Internal & External Calipers - Vernier Calipers - Thickness Gauges BALANCES & SCALES - Pocket Balances - School Balances - Precision Balances - Analytical Balances - Moisture Balances - Spring Scales - Platform Scales - Hanging Scales METER - pH Meters - EC & TDS Meters - ORP Meters - Combo Meters - DO Meters - COD Meters - Photometers - Turbidity Meters - Lux Meter - Moisture Meters THERMOMETER & THERMO-HYGRO - Laboratory Thermometers - Dial Thermometers - Medical Thermometers - Max-Min Thermometer - Wall Thermometers - Infrared Thermometers - Digital Thermometers - Thermocoupe Thermometers - Thermo-Hygrometers - Data Loggers CENTRIFUGES - Small Centrifuges - Hematocrit Centrifuge - Microlitre Centrifuges - Benchtop Centrifuges - Floorstanding Centrifuges CRUSHING INSTRUMENTS - Blenders - Grinders - Homogenizers - Stomachers - Test Sieves STERILIZERS - Glass Bead Sterilizer - Steam Sterilizer - Sterilizing Tube - Sterilizer Accessories OVENS - Universal Ovens - Vacuum Ovens INCUBATORS - Precision Incubator - Cooled Incubator - CO2 Incubator - BOD Incubator - Shaking Incubator LABORATORY BATHS - Oil Bath - Sand Bath - Shaking Water Bath - Ultrasonic Cleaner Bath - Water Bath HEATING INSTRUMENTS - Bunsen Burners - Dry Block Heaters - Heating Mantles - Hot Plates MIXING INSTRUMENTS - Magnetic Stirrers - Overhead Stirrers - Shakers ROTARY EVAPORATORS - Vertical Type - Diagonal Type MICROSCOPES - Monocular Microscopes - Binocular Microscopes - Stereo Microscopes - Microscope Glass Slides - Microscope Cover Slips - Prepared Microscope Slides REFRACTOMETERS - Brix Refractometers - Digital Brix Refractometers - Salinity Refractometers - Digital Salinity Refractometer - Honey Refractometer VISCOMETERS - U-Tube Viscometers - Rotational Viscometers WATER PURIFICATION SYSTEMS - Water Distiller - Water Deionizer OTHERS • Air Analysis • Air Cleaning • Airflow Meters • Animal Care • Apparel • Aquametry • Asphalt • Atomic Absorption • Autoclaves • Bacon Bombs • Bags • Balances • Barometers • Beakers • Blenders • Blood Collection • BOD • Boiling Chips • Borescopes • Bottles • Bottletop Dispensers • Buchner Funnels • Burets • Burners • Calculators • Calipers • Calorimeters • Centrif uge Tubes • Centrifuges • Centrifugeware • Chemicals • Chlorine Analyzers • Chlorine Meters • Clamps & Supports • Cleaning • Clinical Analysis • COD • Colorimeters • Conductivity • Conductivity Meters • Controllers • Counters • Crucibles • Crushing • Cryogenics • Cultur e Media • Culture Tubes • Cuvettes • Cylinders • Dairy Testing • Deionization / Distillation • Desiccators • Discontinued items • Dispensers & Pipetters • Dissolved Oxygen • Dri-Baths • Drug Testing • Dry Baths • Drying Ovens • Educational Products • Electrochemistry • Emergency Equipment • Environmental Chambers • Evaporating Dishes • Extraction Equipment • Extraction Thimbles • Filtration • FisherBrand • Flame Photometers • Flash Point • Flasks • Flocculators • Flowmeters • Fluorimeters • Food Analysis • Food Processing • Freezers • Fume Hoods • Funnels • Furnaces • Furniture • Gas Chromatography • Gas Regulators • General Laboratory • Glassware • Glassware Dryers • Glove Boxes • Gloves • Graduated Cylinders • Hardness Testers • Haws • Health Care • Heating • Heating Blocks • Heating Elements • Heating Mantles • Heating Tapes/ Mats/ Blankets • Histology • Homogenizers • Hot Plates & Stirrers • Humidity • Hydrometers • Hygrometers • Ice Makers • Imhoff Cones • Incubators • Information • ISE • Jars • Karl Fischer Titrators • Kneader • Lab Jacks • Labeling • Laboratory Reactors • Les • Life Science • Light Meters • Liquid Handling • Magnetic Stirrers • Magnets • Materials Testing • Medical Products • Melting Point • Microscopes • Milk Testing • Mixing • Moisture Analyzers • Mortars and Pestles • Multiparameter Meters • Multiwell Plates • Organizers • ORP • Ovens • PCR/ Life Science • Penetrometers • Petri Dishes • Petroleum Testing • pH Buffer Standards • pH Controllers • pH Electrodes • pH Meters & Testers • pH Transmitters • Photometers • Pipet Fillers • Pipet Washers • Pipets • Pipettes • Pipetting • Pitchers • Plastic Labware • Plumbing Fixtures • Polarimeters • Porcelain ware • Pressure Meters • Process Instrumentation • Pumps • Pumps & Dispensers • Pyrometers • Racks • Recorders • Refractometers • Refrigerators & Freezers • Reverse Osmosis Information • Rheology • Rockers • Rotary Evaporators • Rotators • Rubber Stoppers • Rubber Tubing • Safety • Sample Handling • Sample Preparation • Separatory Funnels • Serum Vial Seals • Serum Vial Stoppers • Serum Vials • Shakers • Sieves and Shakers • Siphons & Pumps • Slide Warmers • Soil Sampling • Soil Testing • Solutions • Sound Meters • Soxhlet Extractors • Specimen Containers • Spectrophotometers • Standards • Steam Baths • Sterilizers • Stir Bars • Stirring • Stirring Hot Plates • Stirring Plates • Stoppers • Tachometers • TDS Testers • Teflon Labware • Temperature & Humidity • Test Papers • Test Tube Racks • Test Tubes • Thermal Cyclers • Thermistor Products • Thermocouples • Thermometers • Thermoreactors • Timers and Stopwatches • Titrators • Tools • Trays • Tube Racks • Tubing • Turbidity Meters • Ultrasonic Cleaners • Vacuum Pumps • Vials • Videos • Viscosity • Vortex Mixers • Vwr • Water Baths • Water Chillers • Water Purification • Water Testing • Weather • Weights dan Kebutuhan instrument pendukung Laboratorium
Premium Gold
14 Tahun
JL. Sumur Batu No.1 RT.01 - RW.06 Kel.Sumur Batu - Kec.. Kemayoran - Kota Administrasi Jakarta Pusat, DKI Jakarta, Indonesia -10640
Login Terakhir 22 / 04 / 2024