Pressure Regulator Valve

Danfoss KVP Evaporator Pressure Regulator Valve.Descriptions.The KVP is mounted in the suction line after the evaporator and is used to :1. Mintain a constant evaporating pressure and thereby a constant suface temperature on the evaporator. The regulation is modulating. By throttling in the suction ...

BARKSDALE HIGH PRESSURE VALVE 6142R3HC3 PART NUMBER : 6142R3HC3 General Specifications : - Working Pressure : Hydraulic fluid up to 3,000 psi (206 bar) - Back Pressure : Must not exceed 250 psi (17.2 bar) at return port for satisfactory - Pressure Drop : 14 psi (0.96 bar) at 20 ft/sec - Proof Pr...

New Rotork Fairchild Model 63N NACE MRO175 compliant filter regulator is a service regulator for severe service conditions for sulfide stress crack resistant materials for oil field and associated equipment. This model offers an integral 5 micron filter within its drip well bowl and offers the highe...

Internal Relief (Types 67CR, 67CSR, 67CFR and 67CFSR) If for some reason, outside of normal operating conditions, the downstream pressure exceeds the setpoint of the regulator, the force created by the downstream pressure will lift the diaphragm until the diaphragm is lifted off the relief seat. Thi...

67C Series Specifications The Specifications section gives some general specifications for the 67C Series regulator. A label on the spring case gives the control spring range for a given regulator as it comes from the factory. Available Constructions See Table 2 Body Size, Inlet and Outlet Connectio...

Manufacturer: FISHER Valve Type: Fisher Regulators Sub-Type: Fisher Pressure Reducing Regulators Designed for Digital Instrumentation Optional Smart Bleed Construction Optional Stainless Steel Construction Compact and Light Weight No Air Loss Easy Maintenance Optional Integral Filter Optional Inter...

BARKSDALE HIGH PRESSURE VALVE 6142R3HC3   PART NUMBER : 6142R3HC3   General Specifications : - Working Pressure : Hydraulic fluid up to 3,000 psi (206 bar) - Back Pressure : Must not exceed 250 psi (17.2 bar) at return port for satisfactory - Pressure Drop : 14 psi (0.96 bar) at 20 ...

5200P Air Filter Regulator The Model 5200P Instrument Air Filter Regulator is designed to provide clean, accurate air pressure to instruments, valves, and other automatic control equipment. This filter regulator has been proven to provide accurate operating characteristics under variable conditio...

1000 HP Basic, Cryogenic, SF The Model 1000HP is a high capacity, high pressure regulator with some constructions allowing inlet pressures up to 2600 psig (179.3 Barg), used to control downstream pressure between 10 and 300 psig (0.69 and 20.7 Barg). Available in sizes from 1/2" thru 2" (DN15 thr...

DA4 (Formerly DA3-4) ModeL DA4 is high performance, pressure loaded diaphragm-type, flow-to-open pressure reducing regulator. Design includes an internal pres sure balancing pistoncylinder that provides high flow capacity and high pressure drop capability. The internal trim design ...