Hi, Guest!
  • dari 21 halaman

Jual Beli Produk Spray Gun

SH4700N	Medium Automatic Panel Sprayer - Twin Gun Facility

SH4700N Medium Automatic Panel Sprayer - Twin Gun Facility

Spray Gun
SH4700N Medium Automatic Panel Sprayer - Twin Gun Facility, 2 Flash Off Timers, 1 Coating Counter Our fully pneumatic Panel Sprayers have been developed in association with major coating manufacturers, subsequently we can offer a wide range of options from which to customise for individual requirements. Consistency The Sprayers remove the variations in consistency that is experienced when using hand held guns, thus offering a means to set optimum, repeatable, conditions to achieve consistent results. Consistency in coating application is absolutely essential for subsequent evaluation of colour, gloss, opacity and general appearance, also physical properties including thickness, sagging, levelling and adhesion. Evaluation of these properties is particularly important when applying high performance coatings such as metallic, pearlescent paints and specialist effect coatings. Setting parameters The Sprayers offer the means to set the atomisation, coating build, flash off timing, flow/levelling, film thickness, gun traverse speeds and accelerated drying, these settings are particularly important when defining the characteristics of new formulations. Optimum settings Once the optimum settings for a product have been achieved they can be easily reproduced for quality control for further sampling, thus enabling identification of any inconsistences in formulation or preparation. Features (common to all models) Easy to operate controls All functions and movements are operated by compressed air. Adjustable gun to panel distance, gun travel speed and spray pressure. Adjustable panel lift increments (for achieving optimum over spray of previous pass of the spray gun) Flash off timer, to enable optimum setting of rest period between each coating. Framework and panels are constructed from stainless steel, making for easy cleaning. Magnetic Panel holders (Vacuum holders for non-metallic panels) Suitable for use in all spray booths Lockable castors are fitted to aid easy manoeuvrability. Emergency and Reset button Easy access to internal parts/mechanism for simplified service and cleaning Fitted with integral air filters & regulators Compressed air connection by 12mm diameter tubing hose line, speed fit connectors, or 1⁄2” BSP connection. Spray guns are not fitted as standard, but can be supplied if requested at the time of ordering. Three model formats SH4500N - Pneumatic Panel Sprayer This single gun sprayer has maximum panel holding capacity of 4 standard panels (100 x 150mm) with a maximum spray area of 350 x 500 mm. The operator is able to programme spray pressure, number of coats, traverse speed, lift increment and flash-off timer. An accessory panel is supplied aside of the main control panel for the addition of optional functions and additional equipment. Most popular types of spray guns can be mounted onto the Sprayer, testing and setting is manually controlled. SH4700N - Pneumatic Panel Sprayer The intermediate model accommodates twin gun operation, capacity for 9 standard 100 x 150mm panels and a maximum spray area of 500 x 500mm (when using a single gun). Programmable spray pressure, accessory panels, one each side of the control panel for the addition of options and accessories. SH4800N - Pneumatic Panel Sprayer This top of the range Sprayer provides fully automatic control of two spray guns, plus the ability to operate with an electrostatic “Turbodisc system. A capacity for up to 15 standard (100 x 150mm) test panels with a spray area of 700 x 600mm (when using a single gun). Single or twin gun operation gun changeover, flash-off timing can be selected and panel lift increments can be set from to 40 to 70mm. Two additional panels are supplied, one each side of the control panel for the addition of options and accessories. Electrostatic Spraying We can offer the facility for the fitting of Electrostatic Spray Guns, to our Panel Sprayers, contact our Customer Services and your gun supplier before finalising requirements for this type of system. International standards ASTM D823/A Additional optional equipment Remote Gun Setting: This feature enables the operator to control atomisation and fan width of pneumatically adjusted spray guns via a remote unit (can be supplied with all models). Customer Specifications We would be pleased to advise on any special requirements for models in our range, please contact Customer Services for further information.
Harga
Rp. 1.000
Min. Order
1 buah

Prona-High Performance Medium Pressure Automatic Spray Gun RAR-310-W

Prona-High Performance Medium Pressure Automatic Spray Gun RAR-310-W

Spray Gun
High-Capacity Middle-Pressure Automatic Spray Gun RAR-310-W           Functions and Characteristics     ◆Air intake ,spray pattern width ,coating output adtustment locate outside of the machine . It can be remote controlled remotely and independently to reduce operational inconvenience. Recirculating reture-material hole is set so as to be easy to clean nozzle. ◆Intake pressure can be adjusted freely to your needs to(3.5-3.5bar),reduce coating rebound ,coating saving ,slim atomization amplitude ,large spray pattern width ,fine particles , perfect effect,efficient and rapid spraying. ◆This automatic spray gun is used widely in the industrial circle on account of convenient operation uniform atomization large spray pattern width,fine particles and light in weight . Common usable includes spraying on computer encasing , cellular phone shell cosmetic  encasings, furnitures, hand tools, medicine, food, textile, glass, plastic rubber, publication , die-casing ,iornmongery industry ,etc. ◆There are various fluid nozzles avaiable ,able to match numerous kinds of air caps for your convenience.     ◆Nozzles and needles are made of S1 stainless steel, suitable for water-based paints.       Model : RAR-310-P08(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 0.8 Air cap : E2P Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 270 Fluid output (ml/min) : 150 pattern width ±20 (mm) : 190 weight (g) : 690       Model : RAR-310-P08(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 0.8 Air cap : C21 Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 250 Fluid output (ml/min) : 150 pattern width ±20 (mm) : 80 weight (g) : 690       Model : RAR-310-P08(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 0.8 Air cap : X6 Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 250 Fluid output (ml/min) : 150 pattern width ±20 (mm) : 90 weight (g) : 690       Model : RAR-310-P10(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.0 Air cap : E2P Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 270 Fluid output (ml/min) : 200 pattern width ±20 (mm) : 220 weight (g) : 690       Model : RAR-310-P10(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.0 Air cap : E2 Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 145 Fluid output (ml/min) : 180 pattern width ±20 (mm) : 200 weight (g) : 690       Model : RAR-310-P10(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.0 Air cap : C21 Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 250 Fluid output (ml/min) : 200 pattern width ±20 (mm) : 100 weight (g) : 690       Model : RAR-310-P10(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.0 Air cap : X6 Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 250 Fluid output (ml/min) : 200 pattern width ±20 (mm) : 110 weight (g) : 690       Model : RAR-310-P13(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.3 Air cap : H2 Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 260 Fluid output (ml/min) : 250 pattern width ±20 (mm) : 230 weight (g) : 690       Model : RAR-310-P15(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.5 Air cap : H2 Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 260 Fluid output (ml/min) : 270 pattern width ±20 (mm) : 245 weight (g) : 690       Model : RAR-310-P18(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.8 Air cap : N2 Air pressure kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 180 Fluid output (ml/min) : 310 pattern width ±20 (mm) : 240 weight (g) : 690
Harga
Hubungi Kami
Min. Order
1 buah

Prona - Low Pressure Automatic Spray Gun RAL-100

Prona - Low Pressure Automatic Spray Gun RAL-100

Spray Gun
Functions and Characteristics                                                ◆Light gun-body,the perssure in the air cap below 0.7 bar , perfect adhesive for coating material ,large pattern width , and 20%-30% coating saving ,suitable for  metal powder paints .     ◆The spray pathway is made of stainless steel, nozzles and needles are made of  stainles steel, suitable for water-based paints.       Model : RAL-100-P08(W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 0.8 Air cap : E1 Air Pressure kg/com²(Mpa) : 2.0-3.0(0.2-0.29) Air Consumption (l/min) : 430 Fluid Output (ml/min) : 140 Pattern Width ±20 (mm) : 200 Appox Weight (g) : 465       Model : RAL-100-P10(W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.0 Air cap : E1 Air Pressure kg/com²(Mpa) : 2.0-3.0(0.2-0.29) Air Consumption (l/min) : 430 Fluid Output (ml/min) : 150 Pattern Width ±20 (mm) : 200 Appox Weight (g) : 465       Model : RAL-100-P12(W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.2 Air cap : G2 Air Pressure kg/com²(Mpa) : 2.0-3.0(0.2-0.29) Air Consumption (l/min) : 530 Fluid Output (ml/min) : 350 Pattern Width ±20 (mm) : 270 Appox Weight (g) : 465
Harga
Hubungi Kami
Min. Order
1 buah

Prona - Low Pressure Automatic Spray Gun RAL-101-(W)

Prona - Low Pressure Automatic Spray Gun RAL-101-(W)

Spray Gun
Functions and Characteristics                                                ◆Light gun-body,the perssure in the air cap below 0.7 bar , perfect adhesive for coating material ,large pattern width , and 20%-30% coating saving ,suitable for metal powder paints .     ◆The spray pathway is made of stainless steel, nozzles and needles are made of stainles steel, suitable for water-based paints.       Model : RAL-101-P08(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 0.8 Air cap : E1 Air Pressure kg/com²(Mpa) : 2.0-3.0(0.2-0.29) Air Consumption (l/min) : 430 Fluid Output (ml/min) : 140 Pattern Width ±20 (mm) : 200 Appox Weight (g) : 465       Model : RAL-101-P10(V/W Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.0 Air cap : E1 Air Pressure kg/com²(Mpa) : 2.0-3.0(0.2-0.29) Air Consumption (l/min) : 430 Fluid Output (ml/min) : 150 Pattern Width ±20 (mm) : 200 Appox Weight (g) : 465       Model : RAL-101-P12(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.2 Air cap : G2 Air Pressure kg/com²(Mpa) : 2.0-3.0(0.2-0.29) Air Consumption (l/min) : 530 Fluid Output (ml/min) : 350 Pattern Width ±20 (mm) : 270 Appox Weight (g) : 465
Harga
Hubungi Kami
Min. Order
1 buah

Prona - Universal Automatic Spray Gun RA-101-RC

Prona - Universal Automatic Spray Gun RA-101-RC

Spray Gun
Functions and Characteristics     ◆Intake pressure can be adjusted freely to your needs to (3.5-3.5bar), reduce coating  rebound, coating saving, slim atomization amplitude, large spray pattern width, fine particles, perfect effect, efficient and rapid spraying. ◆This automatic spray gun is used widely in the industrial circle on account of convenient operation uniform atomization large spray pattern width,fine particles and light in weight. Common usable includes spraying on computer encasing , cellular phone shell cosmetic  encasings, furnitures, hand tools, medicine, food, textile, glass, plastic rubber, publication, die-casing ,iornmongery industry ,etc. ◆There are various fluid nozzles avaiable ,able to match numerous kinds of air caps for your convenience.     ◆Nozzles and needles are made of S1 stainless steel, suitable for water-based paints.       Model : RA-101(RC)-P08(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 0.8 Air cap : E2P Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 270 Fluid output (ml/min) : 150 Pattern width ±20 (mm) : 190 Approx weight (g) : 475       Model : RA-101(RC)-P10(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.0 Air cap : E2P Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 270 Fluid output (ml/min) : 200 Pattern width ±20 (mm) : 220 Approx weight (g) : 475       Model : RA-101(RC)-P10(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.0 Air cap : E1 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 90 Fluid output (ml/min) : 100 Pattern width ±20 (mm) : 140 Approx weight (g) : 475       Model : RA-101(RC)-P13(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.3 Air cap : H2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 260 Fluid output (ml/min) : 250 Pattern width ±20 (mm) : 230 Approx weight (g) : 475       Model : RA-101(RC)-P15(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.5 Air cap : H2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 260 Fluid output (ml/min) : 270 Pattern width ±20 (mm) : 245 Approx weight (g) : 475       Model : RA-101(RC)-18(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.8 Air cap : N2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 190 Fluid output (ml/min) : 310 Pattern width ±20 (mm) : 230 Approx weight (g) : 475
Harga
Hubungi Kami
Min. Order
1 buah

Prona - Universal Automatic Spray Gun RA-103

Prona - Universal Automatic Spray Gun RA-103

Spray Gun
Functions and Characteristics      ◆Air intake pressure can be adjusted freely at your request (2.5-3.5bar), reduce coating rebound , coating savings , slim atomization amplitude , large pattern width , fine particles, perfect effect , efficient and repid spraying . ◆There are various fluid nozzles avaliable , able to match numerous kinds of  air caps for your convenience .     ◆The spray pathway is made of stainless steel ,nozzles and needles are made of S1 stainless steel , suitable for water-based paints .       Model : RA-103(RC)-P12(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.2 Air cap : G2P Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 530 Fluid output (ml/min) : 500 Pattern width ±20 (mm) : 400 Approx weight (g) : 550       Model : RA-103(RC)-P15(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.5 Air cap : K2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 330 Fluid output (ml/min) : 270 Pattern width ±20 (mm) : 340 Approx weight (g) : 550       Model : RA-103(RC)-P18(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.8 Air cap : K2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 330 Fluid output (ml/min) : 330 Pattern width ±20 (mm) : 340 Approx weight (g) : 550       Model : RA-103(RC)-P20(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.0 Air cap : R2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 360 Fluid output (ml/min) : 400 Pattern width ±20 (mm) : 320 Approx weight (g) : 550       Model : RA-103(RC)-P25(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.5 Air cap : W2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 360 Fluid output (ml/min) : 500 Pattern width ±20 (mm) : 330 Approx weight (g) : 550       Model : RA-103RC)-20ZP(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.0 Air cap : R1Z Air Pressuer kg/com²(Mpa) : 3.0-3.5 (0.29-0.34) Air consumption (l/min) : 500 Fluid output (ml/min) : 760 Pattern width ±20 (mm) : 370 Approx weight (g) : 550       Model : RA-103(RC)-25ZP(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.5 Air cap : R1Z Air Pressuer kg/com²(Mpa) : 3.0-3.5 (0.29-0.34) Air consumption (l/min) : 500 Fluid output (ml/min) : 760 Pattern width ±20 (mm) : 370 Approx weight (g) : 550
Harga
Hubungi Kami
Min. Order
1 buah

Spray Gun Meiji ( F-75S)

Spray Gun Meiji ( F-75S)

Spray Gun
Tipe Feed : Suction Bentuk Nozzle : Flat Nozzle : dia 1.5 mm Kapasitas Tangki : 750cc Working Pressure : 3.0 - 4.0 bar Lebar Pola : 150-180mm Konsumsi Udara : 4.6-7.1cfm Tekanan : High Pressure Made in : RRC Pemesanan Hubungi : - 085711613441 / Dedy
Harga
Hubungi Kami
Min. Order
0 buah

Spray Gun Sagola ( 472)

Spray Gun Sagola ( 472)

Spray Gun
Tekanan : Low Pressure Made in : Spain Pemesanan Hubungi : - 085711613441 / Dedy
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN AJ-P15P

MEIJI SPRAY GUN AJ-P15P

Spray Gun
  MEIJI SPRAY GUN AJ-P15P     Specifications      Model No. : AJ-P15P Nozzle type : F110 Nozzle Bore (mm) : 1.5 Atomizing air Pressure (Mpa) : 0.25 Pattern air pressure (Mpa) : 0.25 Spraying distance (mm) : 200 Fluid feed pressure (Mpa) : 0.08 Air consumption (L/min) : 290 Paint spraying volume (mL/min) : 330 Maximum effective pattern width (mm) : 275 Weight : 285                  
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN AJ-P10P

MEIJI SPRAY GUN AJ-P10P

Spray Gun
        MEIJI SPRAY GUN AJ-P10P     Specifications      Model No. : AJ-P10P Nozzle type : F110 Nozzle Bore (mm) : 1,0 Atomizing air Pressure (Mpa) : 0.25 Pattern air pressure (Mpa) : 0.25 Spraying distance (mm) : 200 Fluid feed pressure (Mpa) : 0.08 Air consumption (L/min) : 230 Paint spraying volume (mL/min) : 245 Maximum effective pattern width (mm) : 240 Weight : 285            
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN A110-P08P

MEIJI SPRAY GUN A110-P08P

Spray Gun
  MEIJI SPRAY GUN A110-P08P     Specifications      Model No. : A110-P08P Nozzle Type : F110 Paint Feed System : Pressure Nozzle Bore (mm) : 0.8 Standard air cap : 08P Spraying Pressure (Mpa) : 0.25 Spraying distance (mm) : 200 Air consumption (L/min) : 220 Paint spraying volume (mL/min) : 180 Maximum effective pattern width (mm) : 230 Pattern Shape : Tulip Weight (kg) : A110 : 191 Main Application : FA110 & A110 :       Small object ,      low viscosity,      top coating                  
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN FA210-P12P

MEIJI SPRAY GUN FA210-P12P

Spray Gun
  MEIJI SPRAY GUN FA210-P12P     Specifications      Model No. : FA210-P12P  Nozzle Type : F210 Paint Feed System : Pressure Nozzle Bore (mm) : 1.2 Standard air cap : 12P Spraying Pressure (Mpa) : FA210 : 0.25 , A210 : 0.34 Spraying distance (mm) : 250 Air consumption (L/min) : 335 Paint spraying volume (mL/min) : 530 Maximum effective pattern width (mm) : 350 Pattern Shape : Tulip Weight (kg) : FA210 : 515 , A210 : 248 Main Application : Large object,     low viscosity,top coating            
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN F210-S15

MEIJI SPRAY GUN F210-S15

Spray Gun
  MEIJI SPRAY GUN F210-S15     Specifications     Model No : F210-S15 Paint feed system : Suction Nozzle Bore (mm) : 1.5 Standard air cap : 15 Spraying Pressure (mpa) : 0.25 Spraying distance (mm) : 250 Air con-sumption (L/min) : 170 Paint spraying volume (mL/min) : 205 Maximum effective pattern width (mm) : 220 Pattern Shape : Triangle Required compressor output (kw) : 1.5 or more Weight : 391 Standard paint cup : 10SC , 10SLB Measurement (m3) : 0.06/25PC            
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN AIR DUSTER M305-FA-500

MEIJI SPRAY GUN AIR DUSTER M305-FA-500

Spray Gun
  MEIJI SPRAY GUN AIR DUSTER M305-FA-500 Specifications     Model No. : M305-FA-500 Pipe bending angle : Free Pipe length (mm) : 500 Nozzle bore (mm) : 2,0 Air pressure (Mpa) : 0.29 Air con-sumption (L/min) : 100 Weight (g) : 500 Features : Attachment Quick joint, Hexagon socket head screw, rubber tip tube
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN AIR DUSTER M305-FA-200

MEIJI SPRAY GUN AIR DUSTER M305-FA-200

Spray Gun
  MEIJI SPRAY GUN AIR DUSTER M305-FA-200 Specifications     Model No. : M305-FA-200 Pipe bending angle : Free Pipe length (mm) : 200 Nozzle bore (mm) : 2,0 Air pressure (Mpa) : 0.29 Air con-sumption (L/min) : 100 Weight (g) : 200 Features : Attachment Quick joint, Hexagon socket head screw, rubber tip tube      
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN AIR DUSTER MGB-2A-500

MEIJI SPRAY GUN AIR DUSTER MGB-2A-500

Spray Gun
  MEIJI SPRAY GUN AIR DUSTER MGB-2A-500 Specifications     Model No. : MGB-2A-500 Pipe bending angle : Free Pipe length (mm) : 500 Nozzle bore (mm) : 2,0 Air pressure (Mpa) : 0.29 Air con-sumption (L/min) : 110×2 Weight (g) : 600 Features : With magnetic base Suction force: 15kg     Twin nozzles, Freely adjustable pipe angle                        
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN AIR DUSTER DS-3

MEIJI SPRAY GUN AIR DUSTER DS-3

Spray Gun
  MEIJI SPRAY GUN AIR DUSTER DS-3 Specifications     Model No. : DS-3 Pipe bending angle :  - Pipe length (mm) :  - Nozzle bore (mm) : 2.2 Air pressure (Mpa) : 0.29 Air con-sumption (L/min) : 140 Weight (g) : 165 (165) Features : Button Type Quick joint                   
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN MW-A

MEIJI SPRAY GUN MW-A

Spray Gun
        MEIJI SPRAY GUN MW-A     Specifications      Model No. : MW-A Type : Twin nozzle gun Paint feed system : Gravity Nozzle bore (mm) : 8,0 Air nozzle bore (mm) : 2.5 Spraying pressure : 0.29-0.49 Air con-sumption (L/min) : 180-350 Spray pattern : Round Required compressor output (kW) : 2.2 or more Paint Cup Capacity (L) : 2.0×2 Weight : 2000 Measurement (M3) : 0.05/2PC                  
Harga
Hubungi Kami
Min. Order
1 buah

MEIJI SPRAY GUN (MB-3)[MB-3Y]

MEIJI SPRAY GUN (MB-3)[MB-3Y]

Spray Gun
        MEIJI SPRAY GUN (MB-3)[MB-3Y]     Specifications      Model No. : (MB-3)[MB-3Y] Type : Lithin gun Paint feed system : Gravity Nozzle bore (mm) : 4.0, 6.5, 7.5 Air nozzle bore (mm) : 2,0 Spraying pressure : 0.29 Air con-sumption (L/min) : 80 Spray pattern : Round Required compressor output (kW) : 0.75 or more Paint Cup Capacity (L) : 1.4(2.0)[2.0] Weight : 840     (970)[1125] Measurement (M3) : 0.07/4PC            
Harga
Hubungi Kami
Min. Order
1 buah

Spray Hama Solo Gun

Spray Hama Solo Gun

Spray Gun
SPRY HAMA MERK SOLO INI SUDAH TERKENAL SEJAK DAHULU .DI PAKAINYA ENAK DAN MUDAH UNTUK MENYEMPROTKAN PESTISIDA AGAR HAMA TIDAK MERUSAK TANAMAN KITA,SEKARANG ADA KELUARAN MERK LAIN JUGA.MOHON KONFIRMASI UNTUK HARGA SEBENARNYA SILAHKAN HUBUNGI KAMI DI=                                                                       HP.081282223235- WA.0812 8222 3235-    
Harga
Rp. 111
Min. Order
1 buah

Spray Gun - Alat Cat Angin & Grafiti

Spray Gun - Alat Cat Angin & Grafiti

Spray Gun
Hubungi kami untuk informasi selengkapnya --------------------------------------------------------- INTECHINDO Auto Support Gedung Lindeteves Trade Center ( LTC Glodok) Jl. Hayam Wuruk 127, Mangga Besar Jakarta Barat Email : sales.intechindo@ gmail.com Direct Contact : 081389636123 / 081285728372Telpon : 021.22621065
Harga
Hubungi Kami
Min. Order
1 buah

STAR Automatic Spray Guns

STAR Automatic Spray Guns

Spray Gun
S - 710 - AA - 1P / 01P S - 710 - AA - 2P / 02P S - 710 - AB - 0 S - 710 - AB - 1 S - 710 - AB - 2
Harga
Hubungi Kami
Min. Order
0 buah

Prona - Universal Automatic Spray Gun RA-200

Prona - Universal Automatic Spray Gun RA-200

Spray Gun
Functions and Characteristics    ◆ Air intake pressure can be adjusted freely at your request (2.5-3.5bar), reduce coating rebound, coating savings, slim atomization amplitude, large pattern width, fine particles, perfect effect, efficient and repid spraying . ◆There are various fluid nozzles avaliable, able to match numerous kinds of  air caps for your convenience .     ◆The spray pathway is made of stainless steel, nozzles and needles are made of S1 stainless steel , suitable for water-based paints .        Model : RA-200(RC)-P12(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.2 Air cap : G2P Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 530 Fluid output (ml/min) : 500 Pattern width ±20 (mm) : 400 Approx weight (g) : 550       Model : RA-200(RC)-P15(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.5 Air cap : K2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 330 Fluid output (ml/min) : 270 Pattern width ±20 (mm) : 340 Approx weight (g) : 550       Model : RA-200(RC)-P18(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.8 Air cap : K2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 330 Fluid output (ml/min) : 330 Pattern width ±20 (mm) : 340 Approx weight (g) : 550       Model : RA-200(RC)-P20(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.0 Air cap : R2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 360 Fluid output (ml/min) : 400 Pattern width ±20 (mm) : 320 Approx weight (g) : 550       Model : RA-200(RC)-P25(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.5 Air cap : W2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 360 Fluid output (ml/min) : 500 Pattern width ±20 (mm) : 330 Approx weight (g) : 550       Model : RA-200(RC)-20ZP(/W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.0 Air cap : R1Z Air Pressuer kg/com²(Mpa) : 3.0-3.5 (0.29-0.34) Air consumption (l/min) : 500 Fluid output (ml/min) : 760 Pattern width ±20 (mm) : 370 Approx weight (g) : 550       Model : RA-200(RC)-25ZP(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.5 Air cap : R1Z Air Pressuer kg/com²(Mpa) : 3.0-3.5 (0.29-0.34) Air consumption (l/min) : 500 Fluid output (ml/min) : 760 Pattern width ±20 (mm) : 370 Approx weight (g) : 550
Harga
Hubungi Kami
Min. Order
1 buah

Prona - Universal Automatic Spray Gun RA-203

Prona - Universal Automatic Spray Gun RA-203

Spray Gun
Functions and Characteristics    ◆ Air intake pressure can be adjusted freely at your request(2.5-3.5bar),reduce coating rebound , coating savings , slim atomization amplitude , large pattern width ,fine particles ,perfect effect ,efficient and repid spraying . ◆There are various fluid nozzles avaliable , able to match numerous kinds of  air caps for your convenience .     ◆The spray pathway is made of stainless steel ,nozzles and needles are made of S1 stainless steel , suitable for water-based paints .       Model : RA-203(RC)-P12(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.2 Air cap : G2P Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 530 Fluid output (ml/min) : 500 Pattern width ±20 (mm) : 400 Approx weight (g) : 550       Model : RA-203(RC)-P15(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.5 Air cap : K2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 330 Fluid output (ml/min) : 270 Pattern width ±20 (mm) : 340 Approx weight (g) : 550       Model : RA-203(RC)-P18(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 1.8 Air cap : K2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 330 Fluid output (ml/min) : 330 Pattern width ±20 (mm) : 340 Approx weight (g) : 550       Model : RA-203(RC)-P20(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.0 Air cap : R2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 360 Fluid output (ml/min) : 400 Pattern width ±20 (mm) : 320 Approx weight (g) : 550       Model : RA-200(RC)-P25(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.5 Air cap : W2 Air Pressuer kg/com²(Mpa) : 2.5-3.0 (0.24-0.29) Air consumption (l/min) : 360 Fluid output (ml/min) : 500 Pattern width ±20 (mm) : 330 Approx weight (g) : 550       Model : RA-203RC)-20ZP(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.0 Air cap : R1Z Air Pressuer kg/com²(Mpa) : 3.0-3.5 (0.29-0.34) Air consumption (l/min) : 500 Fluid output (ml/min) : 760 Pattern width ±20 (mm) : 370 Approx weight (g) : 550       Model : RA-203(RC)-25ZP(W) Type of Feed : Pressuer Fluid Nozzle orifice (Φmm) : 2.5 Air cap : R1Z Air Pressuer kg/com²(Mpa) : 3.0-3.5 (0.29-0.34) Air consumption (l/min) : 500 Fluid output (ml/min) : 760 Pattern width ±20 (mm) : 370 Approx weight (g) : 550
Harga
Hubungi Kami
Min. Order
1 buah

SH4500N	Small Automatic Panel Sprayer - Single Gun Facility

SH4500N Small Automatic Panel Sprayer - Single Gun Facility

Spray Gun
SH4500N Small Automatic Panel Sprayer - Single Gun Facility, 1 Flash Off Timer, 1 Coating Counter Our fully pneumatic Panel Sprayers have been developed in association with major coating manufacturers, subsequently we can offer a wide range of options from which to customise for individual requirements. Consistency The Sprayers remove the variations in consistency that is experienced when using hand held guns, thus offering a means to set optimum, repeatable, conditions to achieve consistent results. Consistency in coating application is absolutely essential for subsequent evaluation of colour, gloss, opacity and general appearance, also physical properties including thickness, sagging, levelling and adhesion. Evaluation of these properties is particularly important when applying high performance coatings such as metallic, pearlescent paints and specialist effect coatings. Setting parameters The Sprayers offer the means to set the atomisation, coating build, flash off timing, flow/levelling, film thickness, gun traverse speeds and accelerated drying, these settings are particularly important when defining the characteristics of new formulations. Optimum settings Once the optimum settings for a product have been achieved they can be easily reproduced for quality control for further sampling, thus enabling identification of any inconsistences in formulation or preparation. Features (common to all models) Easy to operate controls All functions and movements are operated by compressed air. Adjustable gun to panel distance, gun travel speed and spray pressure. Adjustable panel lift increments (for achieving optimum over spray of previous pass of the spray gun) Flash off timer, to enable optimum setting of rest period between each coating. Framework and panels are constructed from stainless steel, making for easy cleaning. Magnetic Panel holders (Vacuum holders for non-metallic panels) Suitable for use in all spray booths Lockable castors are fitted to aid easy manoeuvrability. Emergency and Reset button Easy access to internal parts/mechanism for simplified service and cleaning Fitted with integral air filters & regulators Compressed air connection by 12mm diameter tubing hose line, speed fit connectors, or 1⁄2” BSP connection. Spray guns are not fitted as standard, but can be supplied if requested at the time of ordering. Three model formats SH4500N - Pneumatic Panel Sprayer This single gun sprayer has maximum panel holding capacity of 4 standard panels (100 x 150mm) with a maximum spray area of 350 x 500 mm. The operator is able to programme spray pressure, number of coats, traverse speed, lift increment and flash-off timer. An accessory panel is supplied aside of the main control panel for the addition of optional functions and additional equipment. Most popular types of spray guns can be mounted onto the Sprayer, testing and setting is manually controlled. SH4700N - Pneumatic Panel Sprayer The intermediate model accommodates twin gun operation, capacity for 9 standard 100 x 150mm panels and a maximum spray area of 500 x 500mm (when using a single gun). Programmable spray pressure, accessory panels, one each side of the control panel for the addition of options and accessories. SH4800N - Pneumatic Panel Sprayer This top of the range Sprayer provides fully automatic control of two spray guns, plus the ability to operate with an electrostatic “Turbodisc system. A capacity for up to 15 standard (100 x 150mm) test panels with a spray area of 700 x 600mm (when using a single gun). Single or twin gun operation gun changeover, flash-off timing can be selected and panel lift increments can be set from to 40 to 70mm. Two additional panels are supplied, one each side of the control panel for the addition of options and accessories. Electrostatic Spraying We can offer the facility for the fitting of Electrostatic Spray Guns, to our Panel Sprayers, contact our Customer Services and your gun supplier before finalising requirements for this type of system. International standards ASTM D823/A Additional optional equipment Remote Gun Setting: This feature enables the operator to control atomisation and fan width of pneumatically adjusted spray guns via a remote unit (can be supplied with all models). Customer Specifications We would be pleased to advise on any special requirements for models in our range, please contact Customer Services for further information.
Harga
Rp. 1.000
Min. Order
1 buah

Prona - High Capacity Low -Pressure Automatic Spray Gun RAR-1000

Prona - High Capacity Low -Pressure Automatic Spray Gun RAR-1000

Spray Gun
High-Capacity Low-Pressure Environment Protection Automatic Spray Gun RAR-1000           Functions and Characteristics   ◆Perfect atomization ,high transmitting efficiency, reduct of air consumption, and 20%-35%coating saving compared with general air spray gun , decrease vapour and sedimentation in the air cap , lower maintence cost and clerning fee. ◆Split design , and remove easily , after maintenance ,no need to relocate during installation.     ◆coating cycles in spray gun that can avoid coating sedimentation. ◆Smooth internal structure that can be easy to clean. ◆Wearble nozzle and needle maket for ,fit strong corrosive coating . ◆High-performance spray gun is suitable for automoblile ,plastic , plastic , woodwork ,ceramics ,industry ,ect.   Model : RAR-1000-P07 Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 0.7 Air Pressure kg/com²(Mpa) : 2.0(0.20) Air Consumpation (l/min) : 280 fluid output (ml/min) : 180 pattern width ±20 (mm) : 180 weight (g) : 545       Model : RAR-1000-P11 Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.1 Air Pressure kg/com²(Mpa) : 2.0(0.20) Air Consumpation (l/min) : 280 fluid output (ml/min) : 200 pattern width ±20 (mm) : 230 weight (g) : 545       Model : RAR-1000-P14 Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.4 Air Pressure kg/com²(Mpa) : 2.0(0.20) Air Consumpation (l/min) : 280 fluid output (ml/min) : 220 pattern width ±20 (mm) : 260 weight (g) : 545       Model : RAR-1000-P17 Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.7 Air Pressure kg/com²(Mpa) : 2.0(0.20) Air Consumpation (l/min) : 280 fluid output (ml/min) : 250 pattern width ±20 (mm) : 290 weight (g) : 545
Harga
Hubungi Kami
Min. Order
1 buah

Prona High Capacity Low -Pressure Automatic Spray Gun RAR-2000-W

Prona High Capacity Low -Pressure Automatic Spray Gun RAR-2000-W

Spray Gun
High-Capacity Low-Pressure Environment Protection Automatic Spray Gun RAR-2000-W           Functions and Characteristics     ◆Perfect atomization ,high transmitting efficiency, reduct of air consumption, and 20%-35% coating saving compared with general air spray gun , decrease vapour and sedimentation in the air cap , lower maintence cost and clerning fee. ◆Split design , and remove easily , after maintenance ,no need to relocate during installation. ◆coating cycles in spray gun that can avoid coating sedimentation. ◆Smooth internal structure that can be easy to clean. ◆Wearble nozzle and needle maket for ,fit strong corrosive coating . ◆High-performance spray gun is suitable for automoblile ,plastic , plastic ,woodwork , ceramics ,industry ,ect.            Model : RAR-2000-P07(W) Type of Feed  : Pressure Fluid Nozzle Orifice (Φmm) : 0.7 air pressure kg/com²(Mpa) : 2.0(0.20) air consumpion (l/min) : 280 Fluid output (ml/min) : 180 pattern width ±20 (mm) : 180 Weight (g) : 611       Model : RAR-2000-P11(W) Type of Feed  : Pressure Fluid Nozzle Orifice (Φmm) : 1.0 air pressure kg/com²(Mpa) : 2.0(0.20) air consumpion (l/min) : 280 Fluid output (ml/min) : 200 pattern width ±20 (mm) : 230 Weight (g) : 611       Model : RAR-2000-P14(W) Type of Feed  : Pressure Fluid Nozzle Orifice (Φmm) : 1.2 air pressure kg/com²(Mpa) : 2.0(0.20) air consumpion (l/min) : 280 Fluid output (ml/min) : 220 pattern width ±20 (mm) : 260 Weight (g) : 611       Model : RAR-2000-P17(W) Type of Feed  : Pressure Fluid Nozzle Orifice (Φmm) : 1.5 air pressure kg/com²(Mpa) : 2.0(0.20) air consumpion (l/min) : 280 Fluid output (ml/min) : 250 pattern width ±20 (mm) : 290 Weight (g) : 611
Harga
Hubungi Kami
Min. Order
1 buah

Prona - Low Pressure Automatic Spray Gun RAL-200

Prona - Low Pressure Automatic Spray Gun RAL-200

Spray Gun
Functions and Characteristics                                                ◆Light gun-body,the perssure in the air cap below 0.7 bar , perfect adhesive for coating material ,large pattern width , and 20%-30% coating saving ,suitable for metal powder paints. ◆The spray pathway is made of stainless steel, nozzles and needles are made of stainles  steel, suitable for water-based paints.       Model : RAL-200-P08(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 0.8 Air cap : G2 Air Pressure kg/com²(Mpa) : 2.0-3.0(0.2-0.29) Air Consumption (l/min) : 530 Fluid Output (ml/min) : 400 Pattern Width ±20 (mm) : 300 Appox Weight (g) : 540       Model : RAL-200-P10(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.0 Air cap : G2 Air Pressure kg/com²(Mpa) : 2.0-3.0(0.2-0.29) Air Consumption (l/min) : 530 Fluid Output (ml/min) : 400 Pattern Width ±20 (mm) : 300 Appox Weight (g) : 540       Model : RAL-200-P12(V/W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 2.0 Air cap : G2 Air Pressure kg/com²(Mpa) : 2.0-3.0(0.2-0.29) Air Consumption (l/min) : 500 Fluid Output (ml/min) : 500 Pattern Width ±20 (mm) : 300 Appox Weight (g) : 540
Harga
Hubungi Kami
Min. Order
1 buah

Prona - Simplified Low-Pressure Automatic Spray Gun Ral-80

Prona - Simplified Low-Pressure Automatic Spray Gun Ral-80

Spray Gun
Functions and Characteristics    ◆Air intake pressure can be adjusted freely at your request(3.5-3.5bar),reduce coating rebound ,coating saving ,slim atomization amplitude ,large spray pattern width ,fine particles , perfect effect,efficient and rapid spraying. ◆This automatic spray gun is used widely in the industrial field on account of convenient operation uniform atomization large spray pattern width,fine particles and light in weight. Common used in spraying on computer encasing , cellular phone shell cosmetic encasings , furnitures , hand tools, medicine ,food , textile ,glass, plastic rubber , publication ,die-casing ,hardware industry ,etc. ◆There are various fluid nozzles avaiable ,able to match numerous kinds of air caps for your convenience.    ◆Nozzles and needles are made of S1 stainless steel, suitable for water-based paints.       Model : RAL-80-P08(V/W) Type of Feed : Pressure Fluid Nozzle Orifice (Φmm) : 0.8 Air Cap : G2 Air pressure kg/com²(Mpa) : 2.0-3.0 (0.2-0.29) Air consumption (l/min) : 500 Fluid output (ml/min) : 400 Pattern width ±20 (mm) : 300 Weight (g) : 260       Model : RAL-80-P10(V/W) Type of Feed : Pressure Fluid Nozzle Orifice (Φmm) : 10 Air Cap : G2 Air pressure kg/com²(Mpa) : 2.0-3.0 (0.2-0.29) Air consumption (l/min) : 500 Fluid output (ml/min) : 400 Pattern width ±20 (mm) : 300 Weight (g) : 260       Model : RAL-80-P12(V/W) Type of Feed : Pressure Fluid Nozzle Orifice (Φmm) : 12 Air Cap : G2 Air pressure kg/com²(Mpa) : 2.0-3.0 (0.2-0.29) Air consumption (l/min) : 500 Fluid output (ml/min) : 500 Pattern width ±20 (mm) : 300 Weight (g) : 260
Harga
Hubungi Kami
Min. Order
1 buah

Prona - Universal Automatic Spray Gun RA-100R

Prona - Universal Automatic Spray Gun RA-100R

Spray Gun
Functions and Characteristics     ◆Lntake pressure can be adjusted freely to you needs to (2.5-3.5bar), reduce coating rebound, coating savings, slim atomization amplitude, large pattern width, fine particles, perfect effect, efficient and repid spraying .  ◆There are various fluid nozzles avaliable, able to match numerous kinds of  air caps for your convenience .     ◆The spray pathway is made of stainless steel, nozzles and needles are made of S1 stainless steel, suitable for water-based paints       Model : RA-100RC-P08(W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 0.8 Air cap : E2P Air Pressure kg/com²(Mpa) : 2.5-3.0(0.24-0.25) Air Consumption (l/min) : 270 Fluid Output (ml/min) : 150 Pattern Width ±20 (mm) : 190 Appox Weight (g) : 475       Model : RA-1000RC-P10(W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.0 Air cap : E2P Air Pressure kg/com²(Mpa) : 2.5-3.0(0.24-0.25) Air Consumption (l/min) : 270 Fluid Output (ml/min) : 200 Pattern Width ±20 (mm) : 220 Appox Weight (g) : 475       Model : RA-100RC-P10(W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.0 Air cap : E1 Air Pressure kg/com²(Mpa) : 2.5-3.0(0.24-0.25) Air Consumption (l/min) : 90 Fluid Output (ml/min) : 100 Pattern Width ±20 (mm) : 140 Appox Weight (g) : 475       Model : RA-100RC-P13(W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.3 Air cap : H2 Air Pressure kg/com²(Mpa) : 2.5-3.0(0.24-0.25) Air Consumption (l/min) : 260 Fluid Output (ml/min) : 250 Pattern Width ±20 (mm) : 230 Appox Weight (g) : 475       Model : RA-100RC-P15(W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.5 Air cap : H2 Air Pressure kg/com²(Mpa) : 2.5-3.0(0.24-0.25) Air Consumption (l/min) : 260 Fluid Output (ml/min) : 270 Pattern Width ±20 (mm) : 245 Appox Weight (g) : 475       Model : RA-100RC-P18(W)Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 1.8 Air cap : N2 Air Pressure kg/com²(Mpa) : 2.5-3.0(0.24-0.25) Air Consumption (l/min) : 190 Fluid Output (ml/min) : 310 Pattern Width ±20 (mm) : 230 Appox Weight (g) : 475       Model : RA-100RC-P05(W) Type of Feed : Pressure Fluid Nozzle orifice (Φmm) : 0.5 Air cap : 05R Air Pressure kg/com²(Mpa) : 2.5-3.0(0.24-0.25) Air Consumption (l/min) : 270 Fluid Output (ml/min) : 120 Pattern Width ±20 (mm) : 40 Appox Weight (g) : 475
Harga
Hubungi Kami
Min. Order
1 buah

  • dari 21 halaman