Test Kit Free Chlorine HI3831F

The HI3831F is a chemical test kit that uses the DPD method to measure free chlorine. The HI3831F is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.


Pre-made reagents for ease of use
All reagents marked with expiration date and lot number for traceability
Color comparison cube for simple determination


 


 



Details

The HI3831F is a colorimetric chemical test kit that determines the free chlorine concentration within a 0.0 to 2.5 mg/L (ppm) range. The HI3831F is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 50 tests.
Features at-a-glance


Complete setup


All required materials are included with the test kit, such as the color comparison cube, and reagent dropper bottles.






High resolution


Readings from 0.0 to 2.5 mg/L are determined to 0.5 mg/L resolution.






Replacement reagents available


There is no need to buy a new kit when reagents are exhausted. The HI3831F-050 reagent set can be ordered to replace the reagents supplied with the kit. This reagent set comes with 1 (20mL) dropper bottle of Reagent 1 and 1 (15mL) dropper bottle of Reagent 2.







Significance of Use
Disinfection is a process of killing disease-causing organisms (or pathogens). Chlorine (Cl2) is a very desirable disinfectant because, when mixed with pure water, it reacts to form hypochlorous acid (HOCl) and hydrochloric acid (HCl). HOCl (free active chlorine) is the most effective form of chlorine for disinfection of pools, spas, and drinking water.
Drinking water municipalities add elemental chlorine to the water supply as chlorine gas, liquid sodium hypochlorite, or dry calcium hypochlorite. In water these form free chlorine ions, which destroy disease-causing pathogens, reduce odor, eliminate bacteria and help to remove unwanted elements. The USEPA requires that residual disinfectant is present in finished drinking water to ensure there is disinfectant available throughout the distribution system, with chlorine acting as one of the disinfectants that provides said residual. However, the EPA has also set a maximum contaminant level of 4.0 mg/L for free chlorine due to potential health effects above this level.




 






Specifications



Range



Resolution



Method



Number of Tests



CTK Type



Ordering Information



Warranty

0.0 to 2.5 mg/L (ppm)

0.5 mg/L (ppm)

DPD

50

Colorimetric

HI3831F test kit comes with color comparison cube, 20 mL reagent 1, and 15 mL reagent 2.