Hi, Guest!

Static Cone Penetrometer Digital HS-4210 Humbolt

Update Terakhir
:
18 / 01 / 2019
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:

Detail Static Cone Penetrometer Digital HS-4210 Humbolt

Static Cone Penetrometer Digital HS-4210 Humbolt

The HS-4210 digital, static cone penetrometer (DSCP), with its large, digital readout, makes testing and recording readings easy. The DSCP can be used to evaluate soil consistency by determining the soil’s level of compaction and/or the bearing capacity. The DSCP is especially useful in evaluating shallow foundations and pavement subgrades where fine-grained and soft soils are being used. The DSCP can also be used to aid technicians in quickly selecting sites for testing, as well as correlating with other tests, based on local conditions, such as standard or modified Proctor, CBR or bearing capacity. The DSCP uses a dual-rod design, which eliminates the need to correct for soil friction on the rod as the cone is pushed through the material. Penetration resistance is read directly from the cone tip and registered on the digital display. The unit comes with a 30" starter rod and a 60° cone with a 1.5cm² area.

Note : The use of static cone penetrometers should not replace laboratory testing of field analysis or be used to produce foundation design data.

Application

A) This procedure is used to assess the in place strength of undisturbed soil and/or compacted materials. The bearing capacity can be used to estimate CBR (California Bearing Ratio), shear strength of strata, thickness of strata and bearing capacity. It may be used in horizontal or vertical construction applications, such as footings and shallow foundations. Typically it is used to assess material  properties  to a depth of 762 mm (30 inches) below the surface. With extensions the DSCP can be advanced to greater depths.

B) The operator pushes the DSCP into soil by applying weight to the handles.

This is designed to handle applied loads up to 250 lb. Loads higher than this will result in an “overload” reading on display. The penetration rate should be consistent and no eratic loads should be applied vertically or horizontally as this will result in unreliable information and could result in bending of the rod. Through continued use of this tool, correlation charts may be developed on local material to correlate to blow counts, unconfined, in situ CBR and other measurements.

C) The Humboldt DSCP can be used to estimate the strength characteristics of fine and grained soils used for construction materials and weak stabilized or modified materials. This may be used to classify cohesive soils in terms of consistency, determining the approximate unconfined compressive strength and the evaluation of shear strength using the penetration principle. These readings do not replace laboratory tests but may be used to obtain needed field data. The Humboldt DSCP should not be used in highly stabilized or cemented materials or for granular materials.

D) The Humboldt DSCP can be used to estimate the strength of in situ materials underlying a bound or highly stabilized layer by first drilling or coring an access hole.

Description

A) The Humboldt DSCP in Figure 1 consists of a large easy to read display, Multiple selectable display units, padded handle grips, 30" dual rod design starter rod with available extensions and a standard 1.5 cm² with an angle of 60°cone.

B) Optional DSCP equipment can be found at www.humboldtmfg.com, including:

• 30" Extension Rods

• Replacement Cones 1.5 cm²

• Optional Cone 3 cm²

• Field Moisture Ovens

• Augers

Spesifications

Large  Easy to Read  Display

 lb, tsf, kg/cm²

Includes Force  Indicator Scale

Maximum  Total Load

250 lb, 70 tsf, 68 kg/cm², 76,000 kPa

Readability

1 lb, 1 tsf, 1 kg/cm²

Head w/Handles

2 in x 2.5 in x 16 in ( 5 lb )

Includes Padded Handles

1% full scale

Starter Rods

30 in ( 76 mm )

Power

9v battery

Drive Cone  Assy.

1.5 cm² with angle of 60° ( opt. 3 cm² available )

Extensions available

30 in ( 76 mm )

Accessories

HS-4210.2

Static Cone Penetrometer (HS-4210), 30" Extension Rod

H-4210.3

60° Cone with 3cm2 max area

Replacement Parts

H-4210.1

60° Cone with 1.5cm2 max area

HS-4210.2

Static Cone Penetrometer (HS-4210), 30" Extension Rod

HS-4210.3

Static Cone Penetrometer (HS-4210), 30" Starter Rod

HS-4210.3.1

Static Cone Penetrometer (HS-4210), Inside Push Rod, (29.875") for Starter Rod

Tampilkan Lebih Banyak

CV PALLSCIENTIFIC

PALLSCIENTIFIC,
adalah perusahaan swasta nasional yang bergerak di bidang Hygiene Industri dan Kesehatan Lingkungan. Bertujuan untuk menjembatani dan memenuhi kebutuhan dunia industri khususnya dan masyarakat pada umumnya. perusahaan yang bergerak di bidang perdagangan barang dan jasa dengan meng-khususkan lingkup usaha perusahaan dalam bidang pengadaan peralatan hygiene industri dan kesehatan lingkungan, Peralatan Laboratorium, alat-alat kesehatan, serta penyediaan jasa pemantauan, pengukuran lingkungan dan perbaikan peralatan.

PERDAGANGAN BARANG.
Produk yang diperdagangkan perusahan utamanya adalah produk produk yang berkaitan dengan hygiene industri, kesehatan lingkungan, kesehatan & keselamatan kerja dan Peralatan laboratorium dan alat  alat kesehatan . Produk produk tersebut antara lain :

A. Peralatan Pemantau Hygiene Industri dan Keselamatan Kerja Peralatan pemantau higiene industri dan keselamatan kerja meliputi :
  • Alat ukur suara ( Sound Level Meter & Noise Dosimeter) 
  • Alat ukur getaran ( Vibration Monitoring) 
  • Alat detector gas berbahaya & mudah terbakar ( Gas Detektor & Flamable Gas Detector)
  • Alat untuk pengambilan sampel gas, debu, mist, fume & aerosol ( gas, fume, aerosol sample pump & monitoring) 

B. Peralatan Pemantau Lingkungan Jenis peralatan tersebut antara lain :
  • Peralatan sampling dan analisa udara maupun peralatan untuk sampling kualitas udara pada cerobong secara isokinetik otomatis 
  • Alat pantau cuaca stasioner yang dilengkapi dengan penyimpanan data ( data logging) sesuai parameter yang diukur. 
  • Peralatan pemantau kwalitas Air Bersih dan Air Minum ( Microbiologi, PH, Conductivity, ORP, Salinity, Dissolved, Turbiditi, TDS, Resisvity, Ion Meter dll..) 
  • Perlatan pemantau kadar kimia dalam makanan 
C. Scientific Instrument, untuk :
  • Laboratorium Kimia Dasar & Kimia Klinik : Laboratorium Bio Kimia, Kimia Klinik , Kimia Analitik, Mikrobiologi, Hematologi, Parasitologi, Kimia Farmasi & Toksikologi, Serologi, Virologi & Immunologi, Kimia Air, Kimia Makanan & Minuman, dll 
  • Laboratorium Fisika & Biologi : Laboratorium Instrumentasi, Fisika dasar, Elektronika Medik, Radiology, alat elektronik, Elektronika Medik, Anatomi & Fisiology, Farmakologi dll. 

D. Media dan Reagensia, Untuk:
  • Menunjang kebutuhan reagent pada Rumah Sakit, Puskesmas, Klinik, dan Laboratorium. 

E. Survey Meter

F. Farmasi
cv pallscientific
cv pallscientific

CV PALLSCIENTIFIC

Anggota PREMIUM 8 Tahun
Lindeteves Trade Center Building, Lantai 1 Blok B 21 No. 3 Jl. Hayam Wuruk 127 Glodok, Jakarta Barat
Indonesia 11180
Jakarta Barat
16 / 03 / 2019
Hubungi Kami
Kontak Kami  

Detail Static Cone Penetrometer Digital HS-4210 Humbolt

Static Cone Penetrometer Digital HS-4210 Humbolt

The HS-4210 digital, static cone penetrometer (DSCP), with its large, digital readout, makes testing and recording readings easy. The DSCP can be used to evaluate soil consistency by determining the soil’s level of compaction and/or the bearing capacity. The DSCP is especially useful in evaluating shallow foundations and pavement subgrades where fine-grained and soft soils are being used. The DSCP can also be used to aid technicians in quickly selecting sites for testing, as well as correlating with other tests, based on local conditions, such as standard or modified Proctor, CBR or bearing capacity. The DSCP uses a dual-rod design, which eliminates the need to correct for soil friction on the rod as the cone is pushed through the material. Penetration resistance is read directly from the cone tip and registered on the digital display. The unit comes with a 30" starter rod and a 60° cone with a 1.5cm² area.

Note : The use of static cone penetrometers should not replace laboratory testing of field analysis or be used to produce foundation design data.

Application

A) This procedure is used to assess the in place strength of undisturbed soil and/or compacted materials. The bearing capacity can be used to estimate CBR (California Bearing Ratio), shear strength of strata, thickness of strata and bearing capacity. It may be used in horizontal or vertical construction applications, such as footings and shallow foundations. Typically it is used to assess material  properties  to a depth of 762 mm (30 inches) below the surface. With extensions the DSCP can be advanced to greater depths.

B) The operator pushes the DSCP into soil by applying weight to the handles.

This is designed to handle applied loads up to 250 lb. Loads higher than this will result in an “overload” reading on display. The penetration rate should be consistent and no eratic loads should be applied vertically or horizontally as this will result in unreliable information and could result in bending of the rod. Through continued use of this tool, correlation charts may be developed on local material to correlate to blow counts, unconfined, in situ CBR and other measurements.

C) The Humboldt DSCP can be used to estimate the strength characteristics of fine and grained soils used for construction materials and weak stabilized or modified materials. This may be used to classify cohesive soils in terms of consistency, determining the approximate unconfined compressive strength and the evaluation of shear strength using the penetration principle. These readings do not replace laboratory tests but may be used to obtain needed field data. The Humboldt DSCP should not be used in highly stabilized or cemented materials or for granular materials.

D) The Humboldt DSCP can be used to estimate the strength of in situ materials underlying a bound or highly stabilized layer by first drilling or coring an access hole.

Description

A) The Humboldt DSCP in Figure 1 consists of a large easy to read display, Multiple selectable display units, padded handle grips, 30" dual rod design starter rod with available extensions and a standard 1.5 cm² with an angle of 60°cone.

B) Optional DSCP equipment can be found at www.humboldtmfg.com, including:

• 30" Extension Rods

• Replacement Cones 1.5 cm²

• Optional Cone 3 cm²

• Field Moisture Ovens

• Augers

Spesifications

Large  Easy to Read  Display

 lb, tsf, kg/cm²

Includes Force  Indicator Scale

Maximum  Total Load

250 lb, 70 tsf, 68 kg/cm², 76,000 kPa

Readability

1 lb, 1 tsf, 1 kg/cm²

Head w/Handles

2 in x 2.5 in x 16 in ( 5 lb )

Includes Padded Handles

1% full scale

Starter Rods

30 in ( 76 mm )

Power

9v battery

Drive Cone  Assy.

1.5 cm² with angle of 60° ( opt. 3 cm² available )

Extensions available

30 in ( 76 mm )

Accessories

HS-4210.2

Static Cone Penetrometer (HS-4210), 30" Extension Rod

H-4210.3

60° Cone with 3cm2 max area

Replacement Parts

H-4210.1

60° Cone with 1.5cm2 max area

HS-4210.2

Static Cone Penetrometer (HS-4210), 30" Extension Rod

HS-4210.3

Static Cone Penetrometer (HS-4210), 30" Starter Rod

HS-4210.3.1

Static Cone Penetrometer (HS-4210), Inside Push Rod, (29.875") for Starter Rod

Tampilkan Lebih Banyak

CV PALLSCIENTIFIC

PALLSCIENTIFIC,
adalah perusahaan swasta nasional yang bergerak di bidang Hygiene Industri dan Kesehatan Lingkungan. Bertujuan untuk menjembatani dan memenuhi kebutuhan dunia industri khususnya dan masyarakat pada umumnya. perusahaan yang bergerak di bidang perdagangan barang dan jasa dengan meng-khususkan lingkup usaha perusahaan dalam bidang pengadaan peralatan hygiene industri dan kesehatan lingkungan, Peralatan Laboratorium, alat-alat kesehatan, serta penyediaan jasa pemantauan, pengukuran lingkungan dan perbaikan peralatan.

PERDAGANGAN BARANG.
Produk yang diperdagangkan perusahan utamanya adalah produk produk yang berkaitan dengan hygiene industri, kesehatan lingkungan, kesehatan & keselamatan kerja dan Peralatan laboratorium dan alat  alat kesehatan . Produk produk tersebut antara lain :

A. Peralatan Pemantau Hygiene Industri dan Keselamatan Kerja Peralatan pemantau higiene industri dan keselamatan kerja meliputi :
  • Alat ukur suara ( Sound Level Meter & Noise Dosimeter) 
  • Alat ukur getaran ( Vibration Monitoring) 
  • Alat detector gas berbahaya & mudah terbakar ( Gas Detektor & Flamable Gas Detector)
  • Alat untuk pengambilan sampel gas, debu, mist, fume & aerosol ( gas, fume, aerosol sample pump & monitoring) 

B. Peralatan Pemantau Lingkungan Jenis peralatan tersebut antara lain :
  • Peralatan sampling dan analisa udara maupun peralatan untuk sampling kualitas udara pada cerobong secara isokinetik otomatis 
  • Alat pantau cuaca stasioner yang dilengkapi dengan penyimpanan data ( data logging) sesuai parameter yang diukur. 
  • Peralatan pemantau kwalitas Air Bersih dan Air Minum ( Microbiologi, PH, Conductivity, ORP, Salinity, Dissolved, Turbiditi, TDS, Resisvity, Ion Meter dll..) 
  • Perlatan pemantau kadar kimia dalam makanan 
C. Scientific Instrument, untuk :
  • Laboratorium Kimia Dasar & Kimia Klinik : Laboratorium Bio Kimia, Kimia Klinik , Kimia Analitik, Mikrobiologi, Hematologi, Parasitologi, Kimia Farmasi & Toksikologi, Serologi, Virologi & Immunologi, Kimia Air, Kimia Makanan & Minuman, dll 
  • Laboratorium Fisika & Biologi : Laboratorium Instrumentasi, Fisika dasar, Elektronika Medik, Radiology, alat elektronik, Elektronika Medik, Anatomi & Fisiology, Farmakologi dll. 

D. Media dan Reagensia, Untuk:
  • Menunjang kebutuhan reagent pada Rumah Sakit, Puskesmas, Klinik, dan Laboratorium. 

E. Survey Meter

F. Farmasi