Hi, Guest!

Series 6100 Computerized Multi-Gas Calibration System

Update Terakhir
:
22 / 03 / 2019
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:

Detail Series 6100 Computerized Multi-Gas Calibration System

The Environics® Series 6100 Computerized Multi-Gas Calibration System is a computer controlled, state-of-the-art instrument for dynamic calibration of ambient air analyzers. The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. The 6100 meets all U.S. Environmental Protection Agency requirements. The Series 6100 consists of a single chassis supporting 2 thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration, and control electronics. Series 6100 Picture Commands are entered from the front panel and displayed on a backlit 4 line by 20 character liquid crystal display. The instrument may also be remotely operated using contact closures or the RS-232 serial data interface, both are standard in the Series 6100. The mass flow controllers are calibrated to a NIST ( National Institute of Standards and Technology) traceable primary standard. The calibration data consists of a comparison of desired versus actual flow over the full dynamic range of the instrument with linear interpolation between points. Calibration data is stored in non-volatile memory and may be updated by the user with a suitable standard. The Series 6100 ozone generator is factory calibrated using a NIST traceable ozone standard. This temperature controlled, ultra-violet ( UV) based ozone generator includes a precision photo-optical feedback circuit to compensate for lamp aging effects. The Series 6100 is available in either a standard rack mount or portable configuration. PRODUCT FEATURES AND BENEFITS User-friendly interactive software with plain language prompts is simple to use, reducing technician training time and virtually eliminating error. Automatic calculation of dilution and span gas flows based on commanded concentration eliminates the need for manual computation and allows rapid transition from point to point. Internally-stored mass flow controller calibration data improves accuracy by as much as a factor of ten and simplifies field recalibration. Mass flow controllers are factory calibrated at 11 points. Internally-stored ozone generator calibration data insures linear, repeatable ozone generation without photometer control. Ozone generator performance meets U.S. EPA criteria for ozone transfer standards. Ozone generator pressure compensation ensures repeatable and stable ozone generation at pressures other than the original calibration pressure. Full, two-way RS-232 Serial Data Interface ( standard) permits remote operation of the instrument including data collection, gas selection, initiation of zero, span and multi-point calibrations. SOFTWARE * Concentration Mode: In response to software prompting, user selects gas port, span ( cylinder) gas concentration, output gas flow ( total) and output gas concentration. Series 6100 automatically delivers concentrations at the total flow specified. * Generate Ozone: Allows user to specify, then generate a precise concentration of ozone. * Gas Phase Titration: Utilizes blend and generate ozone routines to lead user through GPT using " excess NO" method. * Flow Mode: Allows user to manually command a desired rate of flow for each mass flow controller, individually or together, and with or without ozone. * Display: Allows user to monitor flow rates for each mass flow controller separately. Also provides ozone oven block temperature during generate ozone and gas phase titration routines. * Maintain Ports: User enters the name of the span gas in the source cylinder, its concentration ( ppm) and the port to which the cylinder is connected. SPECIFICATIONS Performance* Accuracy Concentration: ± 1.0% setpoint Flow: ± 1.0% setpoint Flow Repeatability: ± 0.05% F.S.O. Warm up time: 30 minutes * Performance specifications are valid when all Mass Flow Controllers are operating between 10% and 100% of full scale flow. Mass flow controllers are calibrated using a NIST traceable Primary Flow Standard, using a Reference Temperature of 25° C ( 77° F) and a Reference Pressure of 760 mm Hg ( 29.92 in. Hg) Ozone Generator Concentration Range: 0.02 - 0.5 ppm at 5 - 10 slpm Optional Ranges: 0.05 - 1.0 ppm at 5 - 10 slpm Accuracy: / - 2% or / - 0.003 ppm Repeatability: / - 2% or / - 0.003 ppm ( for 30 days) Mechanical Inlets Balance: External 1/ 4" Swagelok* Span( s) : External 1/ 4" Swagelok* Outlet One external 1/ 4" Swagelok* * ( or compatible fitting) Operating Pressures at inlets Minimum: 20 psig ( 1.38 Bar) Nominal: 25 psig ( 1.72 Bar) Maximum: 30 psig ( 2.07 Bar) Wetted Surfaces Tubing: Teflon® MFCs: Stainless Steel Seals: Viton® Glass Chambers: Pyrex® Operating temperatures 32° - 122° F ( 0° - 50° C) Performance Temperature Range 59° - 95° F ( 15° - 35° C) Weight Standard: 20 lbs. Including Options: 30 lbs. Dimensions ( w x h x d) Portable: 17" x 7" x 15" Rack: 19" x 7" x 15" Electrical Voltage: 100 to 250 VAC, 50/ 60 Hz Current: 2 Amps ( maximum) Operating Modes Front panel keypad Internal timer control RS-232 serial data interface I/ O control ( 8 inputs / 8 outputs) Data I/ O RS-232 serial data interface I/ O Control ( 8 inputs / 8 outputs) OPTIONS * Rack Mount * Extra Gas Inlets * Solenoid Valve on Output * Permeation Oven * 3rd Mass Flow Controller
Tampilkan Lebih Banyak

PT. REXINDO OTOTEKNIK

PT. REXINDO OOTEKNIK incorporated in Bekasi, Indonesia to fulfill any rapid development of diverse modern industry commands an ever-increasing need for industrial plants and success of these industries is highly dependent on cooperation with the right partner for the business.

 

PT. REXINDO OOTEKNIK established since 2012 by a group of engineers who have experience in the various fields of engineering that could support any industrial needs especially on Engineering, Technical Services, Instrumentation & Control and Industrial Supplies.

We have some experiences of supplying products in varies kind of industries, such as Oil & Gas, Chemical, Power Generation, Petrochemical, Fertilizer, Coal & Mining, Pharmaceutical, Food Industries, Petrcochemical, etc.

 

Our team of sales engineers possess many years of experience in assisting clients in automated processes to enhance product quality, increase productivity, reduce waste, improve safety, and to meet regulatory requirements. The result is a solution tailored to meet the unique needs of our customers.

 

Therefore we represent some agency from International Company that related with our main business.

pt. rexindo ototeknik
pt. rexindo ototeknik

PT. REXINDO OTOTEKNIK

Anggota PREMIUM 12 Tahun
Main Office & Workshop : Jl. Toyogiri Selatan No. 77 Kelurahan Jatimulya Kec. Tambun Selatan Bekasi 17510 Phone : (+62-21) 82746125 Faximile : (+62-21) 8243 5319 Mobile : (+62) 812 9119 2569 E-Mail : info@rexindototeknik.com, Bekasi
Indonesia 17510
Bekasi
28 / 02 / 2019
Hubungi Kami
Kontak Kami  

Detail Series 6100 Computerized Multi-Gas Calibration System

The Environics® Series 6100 Computerized Multi-Gas Calibration System is a computer controlled, state-of-the-art instrument for dynamic calibration of ambient air analyzers. The Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. The 6100 meets all U.S. Environmental Protection Agency requirements. The Series 6100 consists of a single chassis supporting 2 thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration, and control electronics. Series 6100 Picture Commands are entered from the front panel and displayed on a backlit 4 line by 20 character liquid crystal display. The instrument may also be remotely operated using contact closures or the RS-232 serial data interface, both are standard in the Series 6100. The mass flow controllers are calibrated to a NIST ( National Institute of Standards and Technology) traceable primary standard. The calibration data consists of a comparison of desired versus actual flow over the full dynamic range of the instrument with linear interpolation between points. Calibration data is stored in non-volatile memory and may be updated by the user with a suitable standard. The Series 6100 ozone generator is factory calibrated using a NIST traceable ozone standard. This temperature controlled, ultra-violet ( UV) based ozone generator includes a precision photo-optical feedback circuit to compensate for lamp aging effects. The Series 6100 is available in either a standard rack mount or portable configuration. PRODUCT FEATURES AND BENEFITS User-friendly interactive software with plain language prompts is simple to use, reducing technician training time and virtually eliminating error. Automatic calculation of dilution and span gas flows based on commanded concentration eliminates the need for manual computation and allows rapid transition from point to point. Internally-stored mass flow controller calibration data improves accuracy by as much as a factor of ten and simplifies field recalibration. Mass flow controllers are factory calibrated at 11 points. Internally-stored ozone generator calibration data insures linear, repeatable ozone generation without photometer control. Ozone generator performance meets U.S. EPA criteria for ozone transfer standards. Ozone generator pressure compensation ensures repeatable and stable ozone generation at pressures other than the original calibration pressure. Full, two-way RS-232 Serial Data Interface ( standard) permits remote operation of the instrument including data collection, gas selection, initiation of zero, span and multi-point calibrations. SOFTWARE * Concentration Mode: In response to software prompting, user selects gas port, span ( cylinder) gas concentration, output gas flow ( total) and output gas concentration. Series 6100 automatically delivers concentrations at the total flow specified. * Generate Ozone: Allows user to specify, then generate a precise concentration of ozone. * Gas Phase Titration: Utilizes blend and generate ozone routines to lead user through GPT using " excess NO" method. * Flow Mode: Allows user to manually command a desired rate of flow for each mass flow controller, individually or together, and with or without ozone. * Display: Allows user to monitor flow rates for each mass flow controller separately. Also provides ozone oven block temperature during generate ozone and gas phase titration routines. * Maintain Ports: User enters the name of the span gas in the source cylinder, its concentration ( ppm) and the port to which the cylinder is connected. SPECIFICATIONS Performance* Accuracy Concentration: ± 1.0% setpoint Flow: ± 1.0% setpoint Flow Repeatability: ± 0.05% F.S.O. Warm up time: 30 minutes * Performance specifications are valid when all Mass Flow Controllers are operating between 10% and 100% of full scale flow. Mass flow controllers are calibrated using a NIST traceable Primary Flow Standard, using a Reference Temperature of 25° C ( 77° F) and a Reference Pressure of 760 mm Hg ( 29.92 in. Hg) Ozone Generator Concentration Range: 0.02 - 0.5 ppm at 5 - 10 slpm Optional Ranges: 0.05 - 1.0 ppm at 5 - 10 slpm Accuracy: / - 2% or / - 0.003 ppm Repeatability: / - 2% or / - 0.003 ppm ( for 30 days) Mechanical Inlets Balance: External 1/ 4" Swagelok* Span( s) : External 1/ 4" Swagelok* Outlet One external 1/ 4" Swagelok* * ( or compatible fitting) Operating Pressures at inlets Minimum: 20 psig ( 1.38 Bar) Nominal: 25 psig ( 1.72 Bar) Maximum: 30 psig ( 2.07 Bar) Wetted Surfaces Tubing: Teflon® MFCs: Stainless Steel Seals: Viton® Glass Chambers: Pyrex® Operating temperatures 32° - 122° F ( 0° - 50° C) Performance Temperature Range 59° - 95° F ( 15° - 35° C) Weight Standard: 20 lbs. Including Options: 30 lbs. Dimensions ( w x h x d) Portable: 17" x 7" x 15" Rack: 19" x 7" x 15" Electrical Voltage: 100 to 250 VAC, 50/ 60 Hz Current: 2 Amps ( maximum) Operating Modes Front panel keypad Internal timer control RS-232 serial data interface I/ O control ( 8 inputs / 8 outputs) Data I/ O RS-232 serial data interface I/ O Control ( 8 inputs / 8 outputs) OPTIONS * Rack Mount * Extra Gas Inlets * Solenoid Valve on Output * Permeation Oven * 3rd Mass Flow Controller
Tampilkan Lebih Banyak

PT. REXINDO OTOTEKNIK

PT. REXINDO OOTEKNIK incorporated in Bekasi, Indonesia to fulfill any rapid development of diverse modern industry commands an ever-increasing need for industrial plants and success of these industries is highly dependent on cooperation with the right partner for the business.

 

PT. REXINDO OOTEKNIK established since 2012 by a group of engineers who have experience in the various fields of engineering that could support any industrial needs especially on Engineering, Technical Services, Instrumentation & Control and Industrial Supplies.

We have some experiences of supplying products in varies kind of industries, such as Oil & Gas, Chemical, Power Generation, Petrochemical, Fertilizer, Coal & Mining, Pharmaceutical, Food Industries, Petrcochemical, etc.

 

Our team of sales engineers possess many years of experience in assisting clients in automated processes to enhance product quality, increase productivity, reduce waste, improve safety, and to meet regulatory requirements. The result is a solution tailored to meet the unique needs of our customers.

 

Therefore we represent some agency from International Company that related with our main business.