Hi, Guest!

NITTO Positive Displacement FLOWMETER M7 2

Update Terakhir
:
22 / 03 / 2019
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:

Detail NITTO Positive Displacement FLOWMETER M7 2

NITTO POSITIVE DISPLACEMENT FLOWMETER M7 2" M-Series Positive Displacement Flow Meters Materials of Construction Meter and rotors: Cast aluminum ( other metalurgies available including cast iron and stainless steel) Internal components: Aluminum, Ni-Resist, stainless steel, iron Seal materials: Buna-N, Viton® , PTFE Bearings: Carbon, PTFE, Ni-Resist   Liquid Controls M-Series meters meet NTEP ( NIST Handbook 44) and International Weights and Measures accuracy requirements as well as U.S. Military specifications. Design Features Liquid Controls M-Series rotary motion positive displacement ( PD) meters offer the ultimate in measurement accuracy for custody transfer of petroleum products, aviation fuels, LPG, and a broad range of industrial liquids LC meters incorporate a unique design, presenting minimal intrusion in a flowing stream of liquid, as well as minimal pressure drop through the meter. The LC meter consists of a housing in which three synchronized rotors turn with no metal-to-metal contact. Hydraulic sealing is accomplished by a stationary boundary layer of liquid, not by the wiping action of mechanical parts Low pressure drop— will operate on gravity flow or pump pressure. Sustained accuracy— no wear from metal-to-metal contact inside the measuring chamber means minimal deterioration in accuracy over time, fewer recalibrations, and longer service life. Meters conform to NIST and International Weights and Measures accuracy requirements. Wide temperature range— products can be metered accurately from -40° F ( -40° C) to 160° F        ( 71° C) . Wide viscosity range— LC meters can accurately meter products from less than 30 SSU ( less than 1 centipoise) to 1, 500, 000 SSU ( 325, 000 centipoise) . Maximum adaptability— right angle design with choice of stock or custom elbows/ fittings provides unequaled mounting flexibility to meet your installation requirements. Rated to 150psi / 10.5 BAR. Specifications M-Series Positive Displacement Flow Meters: 150psi / 10.5 BAR Models : M7 Size : 2" or 1-1/ 2" Maximum Nominal Flow Rate : 100 gpm / 380 L/ min
Tampilkan Lebih Banyak

PT. DAYA TEKNIK METERINDO

PT. DAYA TEKNIK METERINDO

HARCO GLODOK Lantai 5 Blok F7.
Jl. Hayam Wuruk No.2-5, Jakarta Barat 11180.

Kami adalah sebuah perusahaan yang menyediakan peralatan teknik yang berkedudukan di Taman Sari, Jakarta Barat yang berkomitmen menjadi penyedia terpercaya, ter-valid dan ter-ramah. SPESIALIS KAMI ADALAH ALAT-ALAT TEKNIK UNTUK PENGONTROLAN PENGOLAHAN LIQUID (AIR, MINYAK dan GAS) Untuk mendukung Industri pengolahan air seperti WTP, PDAM dan Industri pengolahan Minyak dan Gas seperti PERTAMINA, PGN, dll. 



PRODUK KAMI :


ALAT UKUR ALIRAN (FLOW METER) ;
POMPA ;

VALVE ;
PRODUK PENDUKUNG SAFETY ;

VISI : MENJADI PERUSAHAAN NOMOR SATU DIBIDANG SUPPLY INSTRUMEN PENGOLAHAN AIR, MINYAK DAN GAS PADA LINGKUP NASIONAL.

MISI : MELAYANI CUSTOMER DAN SUPPLIER DENGAN CARA PALING CEPAT DAN TEPAT, INFORMATIF UNTUK PRODUK YANG DISEDIAKAN, CERDAS DALAM MEMANFAATKAN TEKNOLOGI GUNA MENDUKUNG USAHA.

Untuk pemesanan anda dapat menghubungi kami di :


PT. DAYA TEKNIK METERINDO

HARCO GLODOK Lantai 5 Blok F7

Jl. Hayam Wuruk No.2-5, Jakarta Barat 11180

Telp. : 021-2268 7062,

HP    : 0813 1516 6062; 0813 1461 3990

Email: dayateknikmeterindo@gmail.com

Up : Irwan Pangaribuan

 

pt. daya teknik meterindo
pt. daya teknik meterindo

PT. DAYA TEKNIK METERINDO

PREMIUM GOLD 6 Tahun
PT. DAYA TEKNIK METERINDO
Gedung HARCO GLODOK Lantai 5 Blok F7.
Jl. Hayam Wuruk No. 2-5, Jakarta Barat 11180.
Telp. : 021-2268 7062,
HP : 0813 1516 6062; 0813 1461 3990
Email: dayateknikmeterindo@gmail.com , Jakarta Barat
Indonesia 11180
Jakarta Barat
16 / 08 / 2019
Hubungi Kami
BEST DEAL

Quick Links

Detail NITTO Positive Displacement FLOWMETER M7 2

NITTO POSITIVE DISPLACEMENT FLOWMETER M7 2" M-Series Positive Displacement Flow Meters Materials of Construction Meter and rotors: Cast aluminum ( other metalurgies available including cast iron and stainless steel) Internal components: Aluminum, Ni-Resist, stainless steel, iron Seal materials: Buna-N, Viton® , PTFE Bearings: Carbon, PTFE, Ni-Resist   Liquid Controls M-Series meters meet NTEP ( NIST Handbook 44) and International Weights and Measures accuracy requirements as well as U.S. Military specifications. Design Features Liquid Controls M-Series rotary motion positive displacement ( PD) meters offer the ultimate in measurement accuracy for custody transfer of petroleum products, aviation fuels, LPG, and a broad range of industrial liquids LC meters incorporate a unique design, presenting minimal intrusion in a flowing stream of liquid, as well as minimal pressure drop through the meter. The LC meter consists of a housing in which three synchronized rotors turn with no metal-to-metal contact. Hydraulic sealing is accomplished by a stationary boundary layer of liquid, not by the wiping action of mechanical parts Low pressure drop— will operate on gravity flow or pump pressure. Sustained accuracy— no wear from metal-to-metal contact inside the measuring chamber means minimal deterioration in accuracy over time, fewer recalibrations, and longer service life. Meters conform to NIST and International Weights and Measures accuracy requirements. Wide temperature range— products can be metered accurately from -40° F ( -40° C) to 160° F        ( 71° C) . Wide viscosity range— LC meters can accurately meter products from less than 30 SSU ( less than 1 centipoise) to 1, 500, 000 SSU ( 325, 000 centipoise) . Maximum adaptability— right angle design with choice of stock or custom elbows/ fittings provides unequaled mounting flexibility to meet your installation requirements. Rated to 150psi / 10.5 BAR. Specifications M-Series Positive Displacement Flow Meters: 150psi / 10.5 BAR Models : M7 Size : 2" or 1-1/ 2" Maximum Nominal Flow Rate : 100 gpm / 380 L/ min
Tampilkan Lebih Banyak

PT. DAYA TEKNIK METERINDO

PT. DAYA TEKNIK METERINDO

HARCO GLODOK Lantai 5 Blok F7.
Jl. Hayam Wuruk No.2-5, Jakarta Barat 11180.

Kami adalah sebuah perusahaan yang menyediakan peralatan teknik yang berkedudukan di Taman Sari, Jakarta Barat yang berkomitmen menjadi penyedia terpercaya, ter-valid dan ter-ramah. SPESIALIS KAMI ADALAH ALAT-ALAT TEKNIK UNTUK PENGONTROLAN PENGOLAHAN LIQUID (AIR, MINYAK dan GAS) Untuk mendukung Industri pengolahan air seperti WTP, PDAM dan Industri pengolahan Minyak dan Gas seperti PERTAMINA, PGN, dll. 



PRODUK KAMI :


ALAT UKUR ALIRAN (FLOW METER) ;
POMPA ;

VALVE ;
PRODUK PENDUKUNG SAFETY ;

VISI : MENJADI PERUSAHAAN NOMOR SATU DIBIDANG SUPPLY INSTRUMEN PENGOLAHAN AIR, MINYAK DAN GAS PADA LINGKUP NASIONAL.

MISI : MELAYANI CUSTOMER DAN SUPPLIER DENGAN CARA PALING CEPAT DAN TEPAT, INFORMATIF UNTUK PRODUK YANG DISEDIAKAN, CERDAS DALAM MEMANFAATKAN TEKNOLOGI GUNA MENDUKUNG USAHA.

Untuk pemesanan anda dapat menghubungi kami di :


PT. DAYA TEKNIK METERINDO

HARCO GLODOK Lantai 5 Blok F7

Jl. Hayam Wuruk No.2-5, Jakarta Barat 11180

Telp. : 021-2268 7062,

HP    : 0813 1516 6062; 0813 1461 3990

Email: dayateknikmeterindo@gmail.com

Up : Irwan Pangaribuan