MESIN SPOORING BAN 3D / WHEEL ALIGNMENT TYPE SICAM SA 830 D3
Gambar Produk
MESIN SPOORING BAN 3D / WHEEL ALIGNMENT TYPE SICAM SA 830 D3
Kategori
Update Terakhir
09 / 05 / 2023
Minimum Pembelian
1 Unit
Dilihat Sebanyak
259 Kali
Harga
CALL
Bagikan
+ Keranjang
Spesifikasi MESIN SPOORING BAN 3D / WHEEL ALIGNMENT TYPE SICAM SA 830 D3
Cari berbagai macam dari pilihan terlengkap Mesin Spooring 3D. Cari penawaran terbaik dan termurah dari supplier terlengkap di Indonetwork.
Mesin Spooring 3D / Wheel Alignment Type SICAM SA 830 3D
SA 830 D³ 3D Technology Wheel Aligner. Simple Targets (Reference Stickers Applied on Them) are Mounted on The Wheels. Measuring System is Positioned in The Central Part of The Lift or in The Ground When Working in The Pit. The Sensor Use 2 Camera as Reference System to Allow to Be Always Calibrated (No Periodic Calibration is Needed).
SA 830 D³ is The Only Stereoscopic Wheel Aligner, 2 Cameras Per Wheel (Total 8 Cameras) Measures and Grants High Performances in Terms of Accuracy and Speed/Velocity, The System is Equipped with Rolling Run - Out Function (It Can Be Done Driving The Car in Position) and The Program Maintain The Easy Function of The Traditional Systems.
All This Allow a Complete Check in Just 3 Minutes. The Particular Shape and Position of The Sensors Avoid Any “Overall Dimensions System’s Installation and Allow The Use Also in Small Space Workshop. For Van and Light Truck are Available (As Optional Accessory) Additional Boards for Wheel Base Above 340 mm.
Technical Characteristics :
- 3D Tecnology
- 10 Measurement Cameras
- Windows XP Operating System
- 19” LCD Monitor
- Steering with Camera Up to 30° Rollin Run Out Compesation (30° + 30°)
Tags : Jual Mesin Spooring Ban 3D / Wheel Alignment Murah dan Berkualitas Surabaya Jawa Timur Indonesia.
---
*Note : Hubungi Kontak Kami Sekarang untuk Dapatkan Penawaran Terbaik dan Harga Bersaing.
SA 830 D³ 3D Technology Wheel Aligner. Simple Targets (Reference Stickers Applied on Them) are Mounted on The Wheels. Measuring System is Positioned in The Central Part of The Lift or in The Ground When Working in The Pit. The Sensor Use 2 Camera as Reference System to Allow to Be Always Calibrated (No Periodic Calibration is Needed).
SA 830 D³ is The Only Stereoscopic Wheel Aligner, 2 Cameras Per Wheel (Total 8 Cameras) Measures and Grants High Performances in Terms of Accuracy and Speed/Velocity, The System is Equipped with Rolling Run - Out Function (It Can Be Done Driving The Car in Position) and The Program Maintain The Easy Function of The Traditional Systems.
All This Allow a Complete Check in Just 3 Minutes. The Particular Shape and Position of The Sensors Avoid Any “Overall Dimensions System’s Installation and Allow The Use Also in Small Space Workshop. For Van and Light Truck are Available (As Optional Accessory) Additional Boards for Wheel Base Above 340 mm.
Technical Characteristics :
- 3D Tecnology
- 10 Measurement Cameras
- Windows XP Operating System
- 19” LCD Monitor
- Steering with Camera Up to 30° Rollin Run Out Compesation (30° + 30°)
Tags : Jual Mesin Spooring Ban 3D / Wheel Alignment Murah dan Berkualitas Surabaya Jawa Timur Indonesia.
---
*Note : Hubungi Kontak Kami Sekarang untuk Dapatkan Penawaran Terbaik dan Harga Bersaing.
PT. ANEKA PERKASA MASINDO
Apabila Anda sudah mempunyai Bengkel Cuci Mobil atau Motor dan ingin menggunakan System Cuci Mobil atau Motor dengan memakai Hidrolis Cuci atau Single Post atau Snow Wash maka bergabunglah dengan perusahaan kami untuk menjadi mitra kerjasama.
Kami PT. ANEKA PERKASA MASINDO merupakan Supplier Peralatan Bengkel Mobil yang berdiri Sejak Tahun 1988, yang menyediakan,
1. Peralatan Bengkel Cuci Mobil yang meliputi : a) Hidrolik Cuci Merk Discovery, b) High Pressure Merk Densin, c) Vacum Cleaner Wet & Dry Merk Ghibli, d) Snow Wash, dll.
2. Peralatan Toko Ban yang meliputi : a) Alat Buka Ban Merk Sicam Made in Italy, b) Wheel Balancer Merk Sicam Made in Italy, c) Wheel Aligment Merk Sicam Made in Italy, d) Finish Balancer Merk CEMB Made in Italy, e) Air Inflator Merk PCL Made in England, f) Nitrogen Generator Made in China, g) Scissor Lift Texo Made in Italy, h) Ceegos, Evereternal Made in China.
3. Peralatan Bengkel Mesin yang meliputi : a) Engine Tuner, Timing Light, Dll Merk Okuda Made Japan, b) Compresi Tester, Radiator Cap Tester, Dll Merk NPA Japan, c) Engine Scanner, 4 Gas Analyzer and Smoke Tester erk BrainBee Made in Italy.
4. Peralatan Bengkel Cat yang meliputi : a) Sprayboth, Infrared Lamp, Multi Spot Termomecanica Made in Italy, b) Spraygun, Dryer, Air Filter, Dll.
5. Peralatan Bengkel Bubut, Genset, Dll.
Kami siap untuk Memberikan Servis, Spare Part dan Garansi, dari Peralatan Bengkel yang Bapak/Ibu Beli dari kami. Serta siap menjadi Konsultan Anda dalam Desain, Bangunan, Tenaga Ahli dan Software Bengkel.
-----
Hubungi Kontak Kami Sekarang untuk Dapatkan Penawaran Terbaik dan Harga Bersaing (CALL/WHATSAPP).
• Phone : 0812-356-6954 (Donny Julahardi)
• e-Mail : [email protected]
• Website : www.HidrolikCuciMobilMurah.com
Kami PT. ANEKA PERKASA MASINDO merupakan Supplier Peralatan Bengkel Mobil yang berdiri Sejak Tahun 1988, yang menyediakan,
1. Peralatan Bengkel Cuci Mobil yang meliputi : a) Hidrolik Cuci Merk Discovery, b) High Pressure Merk Densin, c) Vacum Cleaner Wet & Dry Merk Ghibli, d) Snow Wash, dll.
2. Peralatan Toko Ban yang meliputi : a) Alat Buka Ban Merk Sicam Made in Italy, b) Wheel Balancer Merk Sicam Made in Italy, c) Wheel Aligment Merk Sicam Made in Italy, d) Finish Balancer Merk CEMB Made in Italy, e) Air Inflator Merk PCL Made in England, f) Nitrogen Generator Made in China, g) Scissor Lift Texo Made in Italy, h) Ceegos, Evereternal Made in China.
3. Peralatan Bengkel Mesin yang meliputi : a) Engine Tuner, Timing Light, Dll Merk Okuda Made Japan, b) Compresi Tester, Radiator Cap Tester, Dll Merk NPA Japan, c) Engine Scanner, 4 Gas Analyzer and Smoke Tester erk BrainBee Made in Italy.
4. Peralatan Bengkel Cat yang meliputi : a) Sprayboth, Infrared Lamp, Multi Spot Termomecanica Made in Italy, b) Spraygun, Dryer, Air Filter, Dll.
5. Peralatan Bengkel Bubut, Genset, Dll.
Kami siap untuk Memberikan Servis, Spare Part dan Garansi, dari Peralatan Bengkel yang Bapak/Ibu Beli dari kami. Serta siap menjadi Konsultan Anda dalam Desain, Bangunan, Tenaga Ahli dan Software Bengkel.
-----
Hubungi Kontak Kami Sekarang untuk Dapatkan Penawaran Terbaik dan Harga Bersaing (CALL/WHATSAPP).
• Phone : 0812-356-6954 (Donny Julahardi)
• e-Mail : [email protected]
• Website : www.HidrolikCuciMobilMurah.com
Premium Gold
15 Tahun
• Branch Office : Jln. Undaan Wetan 28-T Surabaya, Jawa Timur, Indonesia• Phone : 0812-356-6954 (Call or WhatsApp) - Kota Surabaya, Jawa Timur, Indonesia -60273
Login Terakhir 07 / 03 / 2023