Hi, Guest!

M35080V6 EEPROM Programer

Update Terakhir
:
10 / 11 / 2017
Min. Pembelian
:
1 Buah
Harga Mulai
Rp. 100
Sampai dengan
Rp. 100
Bagikan
:

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Untuk menghindari hal-hal yang tidak diinginkan,harap berhati-hati ketika melakukan transaksi. Indonetwork tidak melakukan verifikasi alamat dan dokumen untuk keanggotaan Free Member. Kami tidak bertanggung jawab apabila terjadi hal-hal yang tidak diinginkan.


Detail M35080V6 EEPROM Programer



Product Description :


Easy to use Windows 98/2000/XP software:


--Read, Program, Erase Incremental Registers\EEPROM
--Erase time to Delivery State* 1-3 seconds
--Erase time to Delivery State for M35080V6 1-10 minutes
--Supported all clock rates 2.5, 5.0 and 6 MHz IC's.
--In-circuit/On-board EEPROM programming
--On-board EEPROM programming for M35080V6
--Self-Check capabilities
--Onboard processor ATmega16 allow to Firmware --Update to new versions
--4 adaptors for SO8 device
--Additional items you'll need to use this tool:
1) Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
2) Power supply: An 12 Volt / 500 mA


NOTE: Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at $0000 The EEPROM memory array $0020-$3FFF set to all $FF. The Status register set to $10

Tampilkan Lebih Banyak

pro mechanic globalindo
Jl. Usama 135 Plosokerep - Ngringo - Kec. Jaten Kab. Karanganyar - SURAKARTA HADININGGRAT 02716881023 atau 081915305777, Jaten Karanganyar Surakarta ( Solo) JAWA TENGAH
Indonesia 98234
Jaten Karanganyar Surakarta ( Solo) JAWA TENGAH
16 / 07 / 2018

Detail M35080V6 EEPROM Programer



Product Description :


Easy to use Windows 98/2000/XP software:


--Read, Program, Erase Incremental Registers\EEPROM
--Erase time to Delivery State* 1-3 seconds
--Erase time to Delivery State for M35080V6 1-10 minutes
--Supported all clock rates 2.5, 5.0 and 6 MHz IC's.
--In-circuit/On-board EEPROM programming
--On-board EEPROM programming for M35080V6
--Self-Check capabilities
--Onboard processor ATmega16 allow to Firmware --Update to new versions
--4 adaptors for SO8 device
--Additional items you'll need to use this tool:
1) Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
2) Power supply: An 12 Volt / 500 mA


NOTE: Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at $0000 The EEPROM memory array $0020-$3FFF set to all $FF. The Status register set to $10

Tampilkan Lebih Banyak