Hi, Guest!

LEVEL WOUND COILS ASTM Standard BS Surabaya

Update Terakhir
:
10 / 07 / 2018
Min. Pembelian
:
0 Roll
Harga
CALL
Bagikan
:

Detail LEVEL WOUND COILS ASTM Standard BS Surabaya

Pipa Tembaga

LEVEL WOUND COILS Level wound coils are especially adapted to long production runs and can be supplied in lengths over 300 metres ( 1000ft) .
The chief advantage is the consistency of diameter which enables the coil to be played off a mandrel for long production runs STRAIGHT LENGTHS STRAIGHT LENGTHS Available in 5.8 metre lengths and on request usually in " hard " temper or if specified - " soft " temper.
Crane Enfield has the capacity to cut lengths as short as 1/ 2 " accurately. Mill tolerances achievable are to within ± 0, 0625 " ( 1.59mm) STRAIGHT LENGTHS STRAIGHT LENGTHS

Available in 5.8 metre lengths and on request usually in " hard " temper or if specified - " soft " temper.
Crane Enfield has the capacity to cut lengths as short as 1/ 2 " accurately. Mill tolerances achievable are to within ± 0, 0625 " ( 1.59mm) Supplied in:

ASTM Standard ( 1/ 4" , 3/ 8" , 1/ 2" , 5/ 8" , 3/ 4" , 7/ 8" , 1" , 1 1/ 8" , 1 1/ 4" , 1 3/ 8" , 1 5/ 8" , 2 1/ 8" , 2 3/ 8" , 2 5/ 8" , 3 1/ 8" , 4 1/ 8" ) .

BS Standard ( British Standard) ( 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm, 67mm, 76mm, 108mm, 133mm, 159mm)
Tampilkan Lebih Banyak

cv. sintera safetindo
cv. sintera safetindo

CV. SINTERA SAFETINDO

Anggota PREMIUM 8 Tahun
Jl. Kedung Cowek 32, 081357551848, SURABAYA
Indonesia 60244
SURABAYA
10 / 07 / 2018

Detail LEVEL WOUND COILS ASTM Standard BS Surabaya

Pipa Tembaga

LEVEL WOUND COILS Level wound coils are especially adapted to long production runs and can be supplied in lengths over 300 metres ( 1000ft) .
The chief advantage is the consistency of diameter which enables the coil to be played off a mandrel for long production runs STRAIGHT LENGTHS STRAIGHT LENGTHS Available in 5.8 metre lengths and on request usually in " hard " temper or if specified - " soft " temper.
Crane Enfield has the capacity to cut lengths as short as 1/ 2 " accurately. Mill tolerances achievable are to within ± 0, 0625 " ( 1.59mm) STRAIGHT LENGTHS STRAIGHT LENGTHS

Available in 5.8 metre lengths and on request usually in " hard " temper or if specified - " soft " temper.
Crane Enfield has the capacity to cut lengths as short as 1/ 2 " accurately. Mill tolerances achievable are to within ± 0, 0625 " ( 1.59mm) Supplied in:

ASTM Standard ( 1/ 4" , 3/ 8" , 1/ 2" , 5/ 8" , 3/ 4" , 7/ 8" , 1" , 1 1/ 8" , 1 1/ 4" , 1 3/ 8" , 1 5/ 8" , 2 1/ 8" , 2 3/ 8" , 2 5/ 8" , 3 1/ 8" , 4 1/ 8" ) .

BS Standard ( British Standard) ( 6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm, 67mm, 76mm, 108mm, 133mm, 159mm)
Tampilkan Lebih Banyak