KRK KAD 04 Under & Over Voltage Protection Relays

Kategori
Update Terakhir
13 / 12 / 2019
Minimum Pembelian
1
Dilihat Sebanyak
403 Kali

Harga
CALL

Bagikan

Spesifikasi KRK KAD 04 Under & Over Voltage Protection Relays

Cari berbagai macam dari pilihan terlengkap Relay. Cari penawaran terbaik dan termurah dari supplier terlengkap di Indonetwork.
Under & Over Voltage Protection Relays are used for 3 phase systems, to protect systems from: Phase loss, phase sequence failure, Under voltage, Over voltage.These functions are shown below. 1) Under & Over Voltage Protection: Under and Over voltage tolerances can be adjusted seperately. If the phase- neutral voltage values are between the adjusted levels ` ` out` ` led is on( 2-3 contacts are closed) .otherwise device close the output( 1-2 contacts are closed) .During normal operation any of phases voltage value decreases under the adjusted value ` ` under` ` led is on, increases over the adjusted value ` ` over` ` led is on.If one of the phases is over the limit and one of the under the limit both ` ` under` ` and ` ` over` ` leds are on.If these condition continues more than adjusted delay time ` ` out` ` led is off( 1-2 contacts are closed) .Related warning leds remain on.If these condition continues less than adjusted time, warning leds are off.Device operating normally. 2) Phase Loss: If the system has lost one of the phases , the output s closed without delay( ` ` on` ` and ` ` under` ` leds are lighted) . In case of supply voltage loss, all leds are off. 3) Phase Sequence Failure: If the squence of the phases are wrong the output is closed without delay. Any case if the sequence is changed during normal operation the output is closed without delay.` ` Under` ` and ` ` over` ` leds are flashing. 4) If any of phases values increases over 1.5XUn or decreases under 0.5XUn device will closed the system without delay. Warning leds will light on accordingly. 5) If phase sequence control is not desired in KAD 04: S1-S2 should be short-cut; SKAD 04: S-N should be short-cut.
Tampilkan Lebih Banyak

PT. Quinratu Karya Prisma

PT. Quinratu Karya Prisma
Merupakan perusahaan yang berkonsentrasi dalam bidang electrikal, baik untuk penyediaan material part maupun untuk sarvice, maintenance dan perencanaan electrician untuk industri building dan lain lain. Sesuai dengan moto perusahaan kamu "WE ARE SOLUTION FOR ELECTRICAL"
Kami hadir sebagai perusahaan yang memberikan solusi maupun jalan keluar untuk persoalan yang dihadapi konsumen maupun calon konsumen kami, adapun brand dan jenis barang yang kamu sediakan sebagai berikut :
 
1. Electricak component (MCB, MCCB, ACB,etc)
2. Cable ( SUPREME, KABELINDO, METAL, ETERNA, etc) 
3. Relays ( MICOM, MCGG, MVTR, SEPAM 1000+ , etc) 
4. Medium Voltage Cubicle Panel. 
5. Distribution Transformer. 
6. Etc.....
Produk yang kami sbb: 
1. RELAY.. SEPAM 1000+ ( MG) , SPAJ, SPAS, SPAM, SPAU, RTXP18 ( ABB) LFAA101, MICOM 122, 124, 921, MBCH, MCGG, MLLG, MVAX, MVTR, MVAA, KCGG ( AREVA / ALSTHOM) 
2. POWER SUPPLAY DAN RELAY IDEC 
3. TRANSFORMER DAN KUBIKAL 20KV-70KV 
4. JOINTING DAN TERMINATING ( RAYCHEM, 3M, CELLPAC) 
5. KABEL ( SUPRIME, TRANGKA, KABEL METAL, KABELINDO) 
6. MCB, MCCB, ACB, GCB, ( MG, ABB, GE, AEG) 
7. CT DAN VT 20KV - 150KV.( SADTEM, TRAFINDO, MG) 
8. PEKARJAAN PEMASANGN INSTALASI GEDUNG DAN PABRIK.
 
Jika ada permintaan

Contact US

Tampilkan Lebih Banyak
Premium Gold
15 Tahun
Komplek dosen IKIP Blok 2. No.43,Jati BeningEmail : marketing@aen.co.id - Bekasi, , Indonesia -Komplek dosen IKIP Blok 2. No.43,Jati BeningEmail : marketing@aen.co.id
Login Terakhir 17 / 05 / 2022