Hi, Guest!

Gradient Kiln Furnaces - ORTON

Update Terakhir
:
28 / 02 / 2019
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:

Detail Gradient Kiln Furnaces - ORTON

PT. SPEKTRA SURYA UTAMA merupakan distributor alat laboratorium sejak tahun 1992 yang merupakan distributor peralatan, sebagai berikut :

Gradient Furnaces - ORTON

The Orton GTF-MD-16 Series (1600°C maximum) Furnace is a specially designed horizontal tube furnaces with controlled, reproducible, linear thermal gradients of approximately 10-12°C per inch. Available in 12" and 16" monitiored zones with 1600°C maximum firing temperature. Thermocouples on 2" centers monitor the temperatures along the gradient zone, so the temperature of the material at any position along the Sample D-tube hearth is known. Visual or post firing analyses of sections taken from the fired material at any position can be measured, recorded, and studied as a function of temperature.

The furnace is a rectangular, metal shell structure that houses the refractory fiber insulation and four molybdenum disilicide heating elements that surround one end of the 2 7/8 ID ceramic heating chamber tube. The samples to be fired are placed on the top of the 2.5 wide high alumina D-tube hearth, which rests on the bottom of the ceramic heating chamber tube. Type "S thermocouples are spaced on 2 centers along the monitored zone and extend vertically through the top of the heating chamber tube. Two IFB end plugs are included to close both ends of the furnace.

 

Low Temperature Gradient Furnace (1200°C max.)

Furnaces designed with lesser temperature requirements have lower cost. 1200°C max temperature furnaces share the same design features as the higher temperature units but can use lower cost insulation packages, heating elements, power controls and thermocouple sensors.

If your application requires max temperature of 1200°C or less, contact Orton for a special quote to meet your gradient furnace needs.


Model GTF-MD-1612

General

A Horizontal, bench top gradient furnace system with 12 monitored zone. Typical temperature gradient is 10 -12°C/inch at 1400°C. Study the effects of temperature on ceramic properties of interest. As a liquidus furnace is useful for determining the maximum temperature at which crystallization will form in a glass, and a minimum temperature at which a glass can be held for extended periods of time without crystal formation and growth.

Can be operated according to ASTM C-829

Includes

  • 1600°C Box furnace with 2.875 ID Alumina core tube
  • Programmable process controller
  • Alumina D-Tube hearth
  • 7 Type "S" thermocouples spaced every 2 inches in the monitored zone
  • 5KVA power transformer and 6 position temperature display meter.

Specifications

Model GTF-MD-1612
Warranty 12 Months
Temperature Range RT to 1,600°C
Furnace Tube style, 12 inch heated zone
Thermocouples Type "S
D-tube hearth Alumina - 2.5 wide, 17 long
Thermocouple spacing 2 inches
Heating elements Molybdenum Disilicide
Temperature Control Honeywell UDC 3200 Process controller
Power Control 4-20ma / SCR
Total Gradient (minimum) 120 - 144°C
Heating/Cooling Rate 1 to 10°C/minute
Power Requirements 208-240vac, 30amp, 50 or 60Hz
Computer Interface Optional
Atmosphere Optional
Furnace Dimensions 25 x 15 x 18 (L x W x H)
Component Dimensions

Controller Console: 17 x 14 x 5.5

Transformer: 15 x 9 x 10

Temperature Display: 10 x 8 x 4.5

Shipping Weight/Dimensions 186 lbs. / 49 x 26 x 31 (1 carton on 1 pallet)

Model GTF-MD-1616

General

A Horizontal, bench top gradient furnace system with 16 monitored zone. Typical temperature gradient is 10 -12°C/inch at 1400°C. Study the effects of temperature on ceramic properties of interest. As a liquidus furnace is useful for determining the maximum temperature at which crystallization will form in a glass, and a minimum temperature at which a glass can be held for extended periods of time without crystal formation and growth.

Can be operated according to ASTM C-829

Includes

  • 1600°C Box furnace with 2.875 ID Alumina core tube
  • Programmable process controller
  • Alumina D-Tube hearth
  • 9 Type "S" thermocouples spaced every 2 inches in the monitored zone
  • 5KVA power transformer and 8 position temperature display meter.

Power Requirements

  • 240vac/220vac/208vac, 30amp, 50/60Hz

Specifications

Model GTF-MD-1616
Warranty 12 Months
Temperature Range RT to 1,600°C
Furnace Tube style, 16 inch heated zone
Thermocouples Type "S"
D-tube hearth Alumina - 2.5 wide, 23 long
Thermocouple spacing 2 inches
Heating elements Molybdenum Disilicide
Temperature Control Honeywell UDC 3200 Process controller
Power Control 4-20ma / SCR
Total Gradient (minimum) 160 - 192°C
Heating/Cooling Rate 1 to 10°C/minute
Power requirements 208/240vac, 30amp, 50 or 60Hz
Computer Interface Optional
Atmosphere Optional
Furnace Dimensions 32 x 15 x 18 (82 x 38 x 46 cm)
Component Dimensions

Controller Console: 17 x 14 x 5.5

Transformer: 15 x 9 x 10

Temperature Display: 10 x 8 x 4.5

Shipping Weight/Dimensions 200 lbs. / 49 x 26 x 31 (1 carton on 1 pallet)


 

Tampilkan Lebih Banyak

PT. SPEKTRA SURYA UTAMA

PT. SPEKTRA SURYA UTAMA merupakan distributor alat laboratorium sejak tahun 1992 untuk peralatan Laboratory, Analytical dan Alat Lingkungan. Kami merupakan distributor peralatan : Polarimeter, Saccharomat, Refractometer, Colorimeter, Saccharoflex - SCHMIDT + HAENSCH; Dissolution Tester, Tap Density Tester, Disintegration Tester, Test Friability Tester, Hardness Tester, Transdermal Diffusion Cell, Automated release Rate tester- Logan Instruments; Levelogger, RainLogger, Water Level Meter - SOLINST - For more info : PT. SPEKTRA SURYA UTAMA Phone : 021-82750620 Mobile : 082211116326 E-mail : sales@spektrasurya.com
pt. spektra surya utama
pt. spektra surya utama

PT. SPEKTRA SURYA UTAMA

PREMIUM GOLD 13 Tahun
PT. SPEKTRA SURYA UTAMA Gedung Nariba Dua, 2 nd Floor Jl. TB Simatupang 49, Jakarta Timur
Indonesia 13760
Jakarta Timur
13 / 03 / 2019
Hubungi Kami
BEST DEAL

Detail Gradient Kiln Furnaces - ORTON

PT. SPEKTRA SURYA UTAMA merupakan distributor alat laboratorium sejak tahun 1992 yang merupakan distributor peralatan, sebagai berikut :

Gradient Furnaces - ORTON

The Orton GTF-MD-16 Series (1600°C maximum) Furnace is a specially designed horizontal tube furnaces with controlled, reproducible, linear thermal gradients of approximately 10-12°C per inch. Available in 12" and 16" monitiored zones with 1600°C maximum firing temperature. Thermocouples on 2" centers monitor the temperatures along the gradient zone, so the temperature of the material at any position along the Sample D-tube hearth is known. Visual or post firing analyses of sections taken from the fired material at any position can be measured, recorded, and studied as a function of temperature.

The furnace is a rectangular, metal shell structure that houses the refractory fiber insulation and four molybdenum disilicide heating elements that surround one end of the 2 7/8 ID ceramic heating chamber tube. The samples to be fired are placed on the top of the 2.5 wide high alumina D-tube hearth, which rests on the bottom of the ceramic heating chamber tube. Type "S thermocouples are spaced on 2 centers along the monitored zone and extend vertically through the top of the heating chamber tube. Two IFB end plugs are included to close both ends of the furnace.

 

Low Temperature Gradient Furnace (1200°C max.)

Furnaces designed with lesser temperature requirements have lower cost. 1200°C max temperature furnaces share the same design features as the higher temperature units but can use lower cost insulation packages, heating elements, power controls and thermocouple sensors.

If your application requires max temperature of 1200°C or less, contact Orton for a special quote to meet your gradient furnace needs.


Model GTF-MD-1612

General

A Horizontal, bench top gradient furnace system with 12 monitored zone. Typical temperature gradient is 10 -12°C/inch at 1400°C. Study the effects of temperature on ceramic properties of interest. As a liquidus furnace is useful for determining the maximum temperature at which crystallization will form in a glass, and a minimum temperature at which a glass can be held for extended periods of time without crystal formation and growth.

Can be operated according to ASTM C-829

Includes

  • 1600°C Box furnace with 2.875 ID Alumina core tube
  • Programmable process controller
  • Alumina D-Tube hearth
  • 7 Type "S" thermocouples spaced every 2 inches in the monitored zone
  • 5KVA power transformer and 6 position temperature display meter.

Specifications

Model GTF-MD-1612
Warranty 12 Months
Temperature Range RT to 1,600°C
Furnace Tube style, 12 inch heated zone
Thermocouples Type "S
D-tube hearth Alumina - 2.5 wide, 17 long
Thermocouple spacing 2 inches
Heating elements Molybdenum Disilicide
Temperature Control Honeywell UDC 3200 Process controller
Power Control 4-20ma / SCR
Total Gradient (minimum) 120 - 144°C
Heating/Cooling Rate 1 to 10°C/minute
Power Requirements 208-240vac, 30amp, 50 or 60Hz
Computer Interface Optional
Atmosphere Optional
Furnace Dimensions 25 x 15 x 18 (L x W x H)
Component Dimensions

Controller Console: 17 x 14 x 5.5

Transformer: 15 x 9 x 10

Temperature Display: 10 x 8 x 4.5

Shipping Weight/Dimensions 186 lbs. / 49 x 26 x 31 (1 carton on 1 pallet)

Model GTF-MD-1616

General

A Horizontal, bench top gradient furnace system with 16 monitored zone. Typical temperature gradient is 10 -12°C/inch at 1400°C. Study the effects of temperature on ceramic properties of interest. As a liquidus furnace is useful for determining the maximum temperature at which crystallization will form in a glass, and a minimum temperature at which a glass can be held for extended periods of time without crystal formation and growth.

Can be operated according to ASTM C-829

Includes

  • 1600°C Box furnace with 2.875 ID Alumina core tube
  • Programmable process controller
  • Alumina D-Tube hearth
  • 9 Type "S" thermocouples spaced every 2 inches in the monitored zone
  • 5KVA power transformer and 8 position temperature display meter.

Power Requirements

  • 240vac/220vac/208vac, 30amp, 50/60Hz

Specifications

Model GTF-MD-1616
Warranty 12 Months
Temperature Range RT to 1,600°C
Furnace Tube style, 16 inch heated zone
Thermocouples Type "S"
D-tube hearth Alumina - 2.5 wide, 23 long
Thermocouple spacing 2 inches
Heating elements Molybdenum Disilicide
Temperature Control Honeywell UDC 3200 Process controller
Power Control 4-20ma / SCR
Total Gradient (minimum) 160 - 192°C
Heating/Cooling Rate 1 to 10°C/minute
Power requirements 208/240vac, 30amp, 50 or 60Hz
Computer Interface Optional
Atmosphere Optional
Furnace Dimensions 32 x 15 x 18 (82 x 38 x 46 cm)
Component Dimensions

Controller Console: 17 x 14 x 5.5

Transformer: 15 x 9 x 10

Temperature Display: 10 x 8 x 4.5

Shipping Weight/Dimensions 200 lbs. / 49 x 26 x 31 (1 carton on 1 pallet)


 

Tampilkan Lebih Banyak

PT. SPEKTRA SURYA UTAMA

PT. SPEKTRA SURYA UTAMA merupakan distributor alat laboratorium sejak tahun 1992 untuk peralatan Laboratory, Analytical dan Alat Lingkungan. Kami merupakan distributor peralatan : Polarimeter, Saccharomat, Refractometer, Colorimeter, Saccharoflex - SCHMIDT + HAENSCH; Dissolution Tester, Tap Density Tester, Disintegration Tester, Test Friability Tester, Hardness Tester, Transdermal Diffusion Cell, Automated release Rate tester- Logan Instruments; Levelogger, RainLogger, Water Level Meter - SOLINST - For more info : PT. SPEKTRA SURYA UTAMA Phone : 021-82750620 Mobile : 082211116326 E-mail : sales@spektrasurya.com