Back to Top

Hi, Guest!

FoxBox Portable Oxygen Analysis System

Update Terakhir
:
01 / 12 / 2019
Min. Pembelian
:
0
Dilihat Sebanyak
:
16 kali
Harga
CALL
Bagikan
:

Detail FoxBox Portable Oxygen Analysis System

Specifications: Accuracy and Resolution: At constant temperature, accuracy better than 0.2% of full scale, 1 - 100% oxygen, resolution 0.001% ; Barometric pressure accuracy better than 0.1% of full scale, resolution 0.001 kPa Barometric Pressure Compensation ( O2) : Executed in floating-point math; eliminates drift caused by variations in barometric pressure Digital Filtration: Adjustable from zero to 50 seconds for 0-63% of a step change, in 0.2 second increments Flow Range: 20 - 2000 ml/ minute, measured and/ or controlled via linearized mass flow meter. Accuracy 2% of reading. Temperature and barometric pressure compensation to STP is not required Four Analog Outputs: Oxygen 3 ranges ( 1 zero-suppressed) ; Barometric pressure 3 ranges ( 2 zero-suppressed) ; CO2 6 ranges; flow rate 7 ranges. Other outputs can be set via the menu system. 0-5V output with 16 bit resolution on all outputs Internal Data Storage: 8100 data points ( all parameters included) , 0.1 - 600 sec interval, multiple recordings supported, non-volatile, uploadable to PC-compatible computer using included software Noise and Drift: At constant temperature, flow rate and concentration- O2 noise < 0.004% pk-pk over 20 minutes; Drift < 0.03% over 24 hours. CO2 noise < 5 ppm pk-pk over 20 minutes, drift < 15 ppm over 24 hours Operating Temperature: 5 - 45 degrees C, relative humidity non-condensing Panel Display: Digital 4-line alphanumeric LCD, simultaneous display of oxygen ( 0.001 % or 0.001 kPa resolution) , flow rate and barometric pressure ( 0.001 kPa resolution) . CO2, if available, also displayed Power Requirements: 9 - 24VDC ( 12 VDC nominal) ,
Tampilkan Lebih Banyak

PT. REXINDO OTOTEKNIK

PT. REXINDO OOTEKNIK incorporated in Bekasi, Indonesia to fulfill any rapid development of diverse modern industry commands an ever-increasing need for industrial plants and success of these industries is highly dependent on cooperation with the right partner for the business.

 

PT. REXINDO OOTEKNIK established since 2012 by a group of engineers who have experience in the various fields of engineering that could support any industrial needs especially on Engineering, Technical Services, Instrumentation & Control and Industrial Supplies.

We have some experiences of supplying products in varies kind of industries, such as Oil & Gas, Chemical, Power Generation, Petrochemical, Fertilizer, Coal & Mining, Pharmaceutical, Food Industries, Petrcochemical, etc.

 

Our team of sales engineers possess many years of experience in assisting clients in automated processes to enhance product quality, increase productivity, reduce waste, improve safety, and to meet regulatory requirements. The result is a solution tailored to meet the unique needs of our customers.

 

Therefore we represent some agency from International Company that related with our main business.

pt. rexindo ototeknik
pt. rexindo ototeknik

PT. REXINDO OTOTEKNIK

PREMIUM GOLD 14 Tahun
Sales & Admin Office : Villa Mutiara Bogor Sekttor I Blok C1 No.9
Kelurahan Mekarwangi Kec. Tanah Sareal Kotamadya Bogor Jawa Barat 16168 – INDONESIA
Phone (0251) 7595433 Faximile (0251) 7595433

Office & Workshop : Jl. Toyogiri Selatan No.77 Kel. Jatimulya Kec. Tambun Selatan Bekasi Timur Jawa Barat 17515 – INDONESIA.
Phone: (021) 82746125 Faximile: (021) 82435319, Bekasi
Indonesia 17510
Bekasi
23 / 06 / 2020
Hubungi Kami
BEST DEAL

Detail FoxBox Portable Oxygen Analysis System

Specifications: Accuracy and Resolution: At constant temperature, accuracy better than 0.2% of full scale, 1 - 100% oxygen, resolution 0.001% ; Barometric pressure accuracy better than 0.1% of full scale, resolution 0.001 kPa Barometric Pressure Compensation ( O2) : Executed in floating-point math; eliminates drift caused by variations in barometric pressure Digital Filtration: Adjustable from zero to 50 seconds for 0-63% of a step change, in 0.2 second increments Flow Range: 20 - 2000 ml/ minute, measured and/ or controlled via linearized mass flow meter. Accuracy 2% of reading. Temperature and barometric pressure compensation to STP is not required Four Analog Outputs: Oxygen 3 ranges ( 1 zero-suppressed) ; Barometric pressure 3 ranges ( 2 zero-suppressed) ; CO2 6 ranges; flow rate 7 ranges. Other outputs can be set via the menu system. 0-5V output with 16 bit resolution on all outputs Internal Data Storage: 8100 data points ( all parameters included) , 0.1 - 600 sec interval, multiple recordings supported, non-volatile, uploadable to PC-compatible computer using included software Noise and Drift: At constant temperature, flow rate and concentration- O2 noise < 0.004% pk-pk over 20 minutes; Drift < 0.03% over 24 hours. CO2 noise < 5 ppm pk-pk over 20 minutes, drift < 15 ppm over 24 hours Operating Temperature: 5 - 45 degrees C, relative humidity non-condensing Panel Display: Digital 4-line alphanumeric LCD, simultaneous display of oxygen ( 0.001 % or 0.001 kPa resolution) , flow rate and barometric pressure ( 0.001 kPa resolution) . CO2, if available, also displayed Power Requirements: 9 - 24VDC ( 12 VDC nominal) ,
Tampilkan Lebih Banyak

PT. REXINDO OTOTEKNIK

PT. REXINDO OOTEKNIK incorporated in Bekasi, Indonesia to fulfill any rapid development of diverse modern industry commands an ever-increasing need for industrial plants and success of these industries is highly dependent on cooperation with the right partner for the business.

 

PT. REXINDO OOTEKNIK established since 2012 by a group of engineers who have experience in the various fields of engineering that could support any industrial needs especially on Engineering, Technical Services, Instrumentation & Control and Industrial Supplies.

We have some experiences of supplying products in varies kind of industries, such as Oil & Gas, Chemical, Power Generation, Petrochemical, Fertilizer, Coal & Mining, Pharmaceutical, Food Industries, Petrcochemical, etc.

 

Our team of sales engineers possess many years of experience in assisting clients in automated processes to enhance product quality, increase productivity, reduce waste, improve safety, and to meet regulatory requirements. The result is a solution tailored to meet the unique needs of our customers.

 

Therefore we represent some agency from International Company that related with our main business.