Hi, Guest!

EMERGENCY EYE-WASH AND DRENCH SHOWER ENWARE EC270

Update Terakhir
:
11 / 01 / 2016
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Untuk menghindari hal-hal yang tidak diinginkan,harap berhati-hati ketika melakukan transaksi. Indonetwork tidak melakukan verifikasi alamat dan dokumen untuk keanggotaan Free Member. Kami tidak bertanggung jawab apabila terjadi hal-hal yang tidak diinginkan.


Detail EMERGENCY EYE-WASH AND DRENCH SHOWER ENWARE EC270

Enware’ s combination showers are
independently tested to comply with
ANSI Z 358.1-2004. The 304 Grade
stainless steel construction provides
superior durability and reliability.

Safety Shower Features
  Stainless steel pipe work
  Stainless steel stay open ball valve
  Stainless steel 200mm ( 8” ) shower head
  Stainless steel impeller with drenching

spray pattern
  Stainless steel pull rod activated shower
Eye/ Face Wash Features
  2 double aerated outlets with dust
covers
  Stainless steel bowl
  Stainless steel stay open ball valve
  Stainless steel hand actuator
  Stainless steel foot rod & pedal actuator
  Integral volume control

Available options:
  Audio visual alarms for alerts
  Flow switch to activate alarms & lights
  Proximity switches an alternative to
fl ow switches
  Thermal relief valve removes
built-up hot water in pipes
  Insulation of Pipework to moderate
water temperature build up
  Anti-freeze valve for cold weather
applications prevents water freeze
  Heat tracing cold weather applications
  Pressure relief valve
  NPT Flange connectors
  Custom manufacturing & design
  316 Grade stainless steel available
  Signage as required by ANSI standard

Inlet Connection 25 mm ( 1” ) BSP
Minimum Water
Supply Line Size
DN25 mm ( 1” ) Nominal Size
Minimum
Requirements
to achieve
ANSI Z358.1-2004
compliance
Min Working Pressure: 210 kPa
Caution should be taken when pressure
exceeds 550 kPa ( 80 psi)
Min Flow Requirements:
98.7 lpm ( 26.1 US gpm)
Minimum
performance
values for for
low pressure
installations*
or applications
not requiring
ANSI Z358.1-2004
Min Working Pressure
with 15mm ( ½ ” ) Eye Wash
Outlets: 180 kPa ( 25.7 psi)
[ Safety showers are fl ow volume
dependent and the line size needs
to be hydraulically calculated.]
For low pressure applications
request 10mm ( ” ) outlets or
consider combination shower
with eye wash only.
Minimum Working Pressure with
10mm ( ” ) Eye Wash Outlets:
80 kPa ( 11.4 psi)
Waste Water
Outlet Size
DN 40 mm ( 1 ½ ” ) OD
Mounting
Base Plate
Size 150 x150 mm
( 5 yD € ” x 5 yD € ” ) with
4 Bolt Holes 11mm ( wD † ” )
Shipping Weight: 16 kg ( 35 lbs)
Dimensions: 117 x 40 x 35mm

Informasi lebih lanjut bisa menghubungi :
Contact Person : Yoga.s
Hp : 085880111657
Email : yogakarya1@ yahoo.co.id
YM : yogakarya2
Website : www.karyanusatama.com
Tampilkan Lebih Banyak

karya nusatama group
Jl.Jeruk Purut Rt 003/03 Kel.Cilandak Timur, Kec.Pasar Minggu, Jakarta Selatan
Indonesia 12560
Jakarta Selatan
08 / 04 / 2016

Detail EMERGENCY EYE-WASH AND DRENCH SHOWER ENWARE EC270

Enware’ s combination showers are
independently tested to comply with
ANSI Z 358.1-2004. The 304 Grade
stainless steel construction provides
superior durability and reliability.

Safety Shower Features
  Stainless steel pipe work
  Stainless steel stay open ball valve
  Stainless steel 200mm ( 8” ) shower head
  Stainless steel impeller with drenching

spray pattern
  Stainless steel pull rod activated shower
Eye/ Face Wash Features
  2 double aerated outlets with dust
covers
  Stainless steel bowl
  Stainless steel stay open ball valve
  Stainless steel hand actuator
  Stainless steel foot rod & pedal actuator
  Integral volume control

Available options:
  Audio visual alarms for alerts
  Flow switch to activate alarms & lights
  Proximity switches an alternative to
fl ow switches
  Thermal relief valve removes
built-up hot water in pipes
  Insulation of Pipework to moderate
water temperature build up
  Anti-freeze valve for cold weather
applications prevents water freeze
  Heat tracing cold weather applications
  Pressure relief valve
  NPT Flange connectors
  Custom manufacturing & design
  316 Grade stainless steel available
  Signage as required by ANSI standard

Inlet Connection 25 mm ( 1” ) BSP
Minimum Water
Supply Line Size
DN25 mm ( 1” ) Nominal Size
Minimum
Requirements
to achieve
ANSI Z358.1-2004
compliance
Min Working Pressure: 210 kPa
Caution should be taken when pressure
exceeds 550 kPa ( 80 psi)
Min Flow Requirements:
98.7 lpm ( 26.1 US gpm)
Minimum
performance
values for for
low pressure
installations*
or applications
not requiring
ANSI Z358.1-2004
Min Working Pressure
with 15mm ( ½ ” ) Eye Wash
Outlets: 180 kPa ( 25.7 psi)
[ Safety showers are fl ow volume
dependent and the line size needs
to be hydraulically calculated.]
For low pressure applications
request 10mm ( ” ) outlets or
consider combination shower
with eye wash only.
Minimum Working Pressure with
10mm ( ” ) Eye Wash Outlets:
80 kPa ( 11.4 psi)
Waste Water
Outlet Size
DN 40 mm ( 1 ½ ” ) OD
Mounting
Base Plate
Size 150 x150 mm
( 5 yD € ” x 5 yD € ” ) with
4 Bolt Holes 11mm ( wD † ” )
Shipping Weight: 16 kg ( 35 lbs)
Dimensions: 117 x 40 x 35mm

Informasi lebih lanjut bisa menghubungi :
Contact Person : Yoga.s
Hp : 085880111657
Email : yogakarya1@ yahoo.co.id
YM : yogakarya2
Website : www.karyanusatama.com
Tampilkan Lebih Banyak