Hi, Guest!

15-C25 Airmix® System Package - Cart Mount

Update Terakhir
:
13 / 08 / 2018
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Untuk menghindari hal-hal yang tidak diinginkan,harap berhati-hati ketika melakukan transaksi. Indonetwork tidak melakukan verifikasi alamat dan dokumen untuk keanggotaan Free Member. Kami tidak bertanggung jawab apabila terjadi hal-hal yang tidak diinginkan.

Detail 15-C25 Airmix® System Package - Cart Mount

DESCRIPTION
  • Efficiency: perfect for Airmix finish
  • Optimization: built with minimal parts
  • Simplicity : lowest cost of ownership
Technical manual
PERFORMANCE
  • Constant delivery and pulse free for superior finish
  • Priming at very low air pressure (0,6)
PRODUDUCTIVITY
  • Large foot valve to handle high viscosity material up to 5,000 cPs
  • A closed construction to prevent from risk of injuries & to protect lubricant from external contamination
  • Quick mauntenance thanks to an easy rotable outlet fitting
  • Facilitate pump priming & flushing thanks to a design made to eliminate dead zone : time sized
  • Leak monitoring vent hole for fast control
  • A quiet air motor make very low noise
SUSTAINABILITY
  • 45% less part vs competitors for the air motor to provide a better maintenance
  • Differential air motor to ovaid the paint pump from frost
  • Ultra coated pluger for less friction & improved abrasion resistance
  • Single GT seal to avoid throat packing maintenance & low friction & offers a large lubricant wet cup
The 15C25 Compact Airmix paint pump is recommended to handle all types of materials, ranging from medium to low viscosity.
Technical data cable
  • Designation Value Unit: metric (US)
  • Pressure Ratio 15/1
  • Maximum Fluid Pressure 90 (1305) bar (psi)
  • Maximum Air Pressure 6 (87) bar (psi)
  • Air Consumption 2.8 (1.65) m/h (cfm)
  • Weight 7.7 (17) kg (lbs)
  • Maximum Temperature 60 (140) C (F)
  • Weighted Sound Level 71.2 dBA
  • Recommended Air Pressure 2-5 (29-72.5) bar (psi)
  • Fluid Output at 30 cycles/mn 0.75 (0.2) I/min (gaI/mn)
  • Fluid Output at 20 cycles/mn 0.5 (0.13) I/mn (gaI/mn
  • Fluid Volume Per Cycles 25 cc
  • Free Flow Rate 1.5 (0.39) I/mn (gaI/mn)
  • Fluid Output at 15 Cycles 0.375 (0.01) I/mn
  • Air Consumption at 30 Cycles/mn at 4 Bar (60 psi) 2.8 m/h (cfm)
  • Displacement Per Cycle 25 (1.52) cc (cubic inch)
  • Motor Type 245-4
  • Air Inlet F3/8'' BSP/ F3/8'' BSP
  • Fluid Outlet F 3/8'' NPS / MI/2 JIC
  • Fluid Inlet F 1/2'' BSP / M26X125
  • Hard Chrome Stainless Steel, Wetted Parts
  • Number of cycles per liter of product 40 Sealing packing upper and lower GT polyethylene
  • Height 57.5 (22.6) cm (in) Width 32 (12.6) cm (in) Depth 17 (6.69) cm (in) Wetted parts stainless steel
  • Technologies GT Sealing
This technology represents a new generation of sealing designed to extend the life of a pump piston.
Cup Lub
A pump with a lubricant-filled cup on the top of the fluid section
2 Ball
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Triple Chrome Layer
This is a spesial treatment for very high sustainability & is applied to the piston of the fluid section of a pump
Tampilkan Lebih Banyak

CV. BERKAH ABADI

CV. BERKAH ABADI with the concept of Total Solution is the answer of the need for quality and speed of service to customers.
Started from service, maintenance and design for the purpose of finishing and painting.
CV. BERKAH ABADI is based in central Java Magelang with vision and mission as well as global service coverage dedicated to customer satisfaction.
With sufficient technical experience CV. BERKAH ABADI is trying to give the best service to customer.
CV. BERKAH ABADI was established in th 2013 and started to grow in 2017 to become distributor of SAMES KREMLIN in Indonesia (Central & EAST Java)
to all partners / customers with the best service quality. Speed, quality of service, fastest response time, quality control and warranty is our main capital as the leading in Spray Painting Equipment Supplier and its supporting business.
Business concept CV. BERKAH ABADI is a Total Solution Bussiness Partner who has vision and mission as a partner / strategic partner that can provide satisfaction and comfort for Personal Customer or Corporate Customer.
cv. berkah abadi
cv. berkah abadi

CV. BERKAH ABADI

Turus 02/03 Tempurejo Tempuran, kab Magelang - Jawa tengah Indonesia 56161, MAGELANG
Indonesia 56161
MAGELANG
31 / 01 / 2019
BEST DEAL

Detail 15-C25 Airmix® System Package - Cart Mount

DESCRIPTION
  • Efficiency: perfect for Airmix finish
  • Optimization: built with minimal parts
  • Simplicity : lowest cost of ownership
Technical manual
PERFORMANCE
  • Constant delivery and pulse free for superior finish
  • Priming at very low air pressure (0,6)
PRODUDUCTIVITY
  • Large foot valve to handle high viscosity material up to 5,000 cPs
  • A closed construction to prevent from risk of injuries & to protect lubricant from external contamination
  • Quick mauntenance thanks to an easy rotable outlet fitting
  • Facilitate pump priming & flushing thanks to a design made to eliminate dead zone : time sized
  • Leak monitoring vent hole for fast control
  • A quiet air motor make very low noise
SUSTAINABILITY
  • 45% less part vs competitors for the air motor to provide a better maintenance
  • Differential air motor to ovaid the paint pump from frost
  • Ultra coated pluger for less friction & improved abrasion resistance
  • Single GT seal to avoid throat packing maintenance & low friction & offers a large lubricant wet cup
The 15C25 Compact Airmix paint pump is recommended to handle all types of materials, ranging from medium to low viscosity.
Technical data cable
  • Designation Value Unit: metric (US)
  • Pressure Ratio 15/1
  • Maximum Fluid Pressure 90 (1305) bar (psi)
  • Maximum Air Pressure 6 (87) bar (psi)
  • Air Consumption 2.8 (1.65) m/h (cfm)
  • Weight 7.7 (17) kg (lbs)
  • Maximum Temperature 60 (140) C (F)
  • Weighted Sound Level 71.2 dBA
  • Recommended Air Pressure 2-5 (29-72.5) bar (psi)
  • Fluid Output at 30 cycles/mn 0.75 (0.2) I/min (gaI/mn)
  • Fluid Output at 20 cycles/mn 0.5 (0.13) I/mn (gaI/mn
  • Fluid Volume Per Cycles 25 cc
  • Free Flow Rate 1.5 (0.39) I/mn (gaI/mn)
  • Fluid Output at 15 Cycles 0.375 (0.01) I/mn
  • Air Consumption at 30 Cycles/mn at 4 Bar (60 psi) 2.8 m/h (cfm)
  • Displacement Per Cycle 25 (1.52) cc (cubic inch)
  • Motor Type 245-4
  • Air Inlet F3/8'' BSP/ F3/8'' BSP
  • Fluid Outlet F 3/8'' NPS / MI/2 JIC
  • Fluid Inlet F 1/2'' BSP / M26X125
  • Hard Chrome Stainless Steel, Wetted Parts
  • Number of cycles per liter of product 40 Sealing packing upper and lower GT polyethylene
  • Height 57.5 (22.6) cm (in) Width 32 (12.6) cm (in) Depth 17 (6.69) cm (in) Wetted parts stainless steel
  • Technologies GT Sealing
This technology represents a new generation of sealing designed to extend the life of a pump piston.
Cup Lub
A pump with a lubricant-filled cup on the top of the fluid section
2 Ball
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Triple Chrome Layer
This is a spesial treatment for very high sustainability & is applied to the piston of the fluid section of a pump
Tampilkan Lebih Banyak

CV. BERKAH ABADI

CV. BERKAH ABADI with the concept of Total Solution is the answer of the need for quality and speed of service to customers.
Started from service, maintenance and design for the purpose of finishing and painting.
CV. BERKAH ABADI is based in central Java Magelang with vision and mission as well as global service coverage dedicated to customer satisfaction.
With sufficient technical experience CV. BERKAH ABADI is trying to give the best service to customer.
CV. BERKAH ABADI was established in th 2013 and started to grow in 2017 to become distributor of SAMES KREMLIN in Indonesia (Central & EAST Java)
to all partners / customers with the best service quality. Speed, quality of service, fastest response time, quality control and warranty is our main capital as the leading in Spray Painting Equipment Supplier and its supporting business.
Business concept CV. BERKAH ABADI is a Total Solution Bussiness Partner who has vision and mission as a partner / strategic partner that can provide satisfaction and comfort for Personal Customer or Corporate Customer.