Hi, Guest!

10C18 Airmix® Paint Pump Compact

Update Terakhir
:
27 / 07 / 2018
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Untuk menghindari hal-hal yang tidak diinginkan,harap berhati-hati ketika melakukan transaksi. Indonetwork tidak melakukan verifikasi alamat dan dokumen untuk keanggotaan Free Member. Kami tidak bertanggung jawab apabila terjadi hal-hal yang tidak diinginkan.

Detail 10C18 Airmix® Paint Pump Compact

10C18 Airmix® Paint Pump Compact

The compact AIRMIX® painting pump ensures constant delivery and pulse free for superior finish.

 

  • Efficiency: perfect for AIRMIX® finish
  • Optimization: built with minimal parts
  • Simplicity: lowest cost of ownership
Description
  • Efficiency: perfect for AIRMIX® finish
  • Optimization: built with minimal parts
  • Simplicity: lowest cost of ownership

 

Performance

  • An optimized air motor works perfectly with an air compressor of only 0,5 HP & offers low noise level.

Productivity

  • A large foot valve is perfect to handle a large range of materials.
  • Reduced fluid section volume minimizes product and solvent losses during flushing.

Sustainability

  • No external air distributor allows 45% less part vs competitors for a better maintenance
  • 20 years of experience on component reliability
  • A closed construction decreases the risk of injuries and protect lubricant from external contamination
  • Easy coupling for a quick dissasembling.
  • Triple chrome-plated wetted parts compatible with all waterborne products.
  • Single GT seal, no throat packing maintenance, low friction & large lubricant wet cup
  • The mobile seal located on the piston ensures the mechanical cleaning of  the fluid section internal wall during the paint pump run.

 

The 10C18 Airmix® pump packages are available in either cart, stand or wall-mounted versions. Packages are available with one Xcite™ 120 bar manual Airmix® spray gun equipped with or without an 06.094 tip size and 7.5m (25ft) fluid and air hoses. 
A large variety of accessories is available for many customer needs.

 


Technical data table
Designation Value Unit: metric (US) Pressure Ratio 10/1   Maximum Fluid Pressure 60 (870) bar (psi) Maximum Air Pressure 6 (87) bar (psi) Air Consumption 1.9 (1.12) m³/h (cfm) Weight 5.3 (12) kg (lbs) Maximum Temperature 60 (140) °C (°F) Sound Level 79.4 dBa Recommended Air Pressure 2 - 5 (29 - 72.5) bar (psi) Fluid Output at 30 cycles/mn 0.54 (014) l/min (gal/mn) Fluid Output at 20 cycles/mn 0.36 (0.095) l/mn (gal/mn) Fluid Volume Per Cycle 18 (0.61) cc Free Flow Rate 1.1 (0.29) l/mn (gal/mn) Fluid Output at 15 Cycles 0.27 (0.07) l/mn Air Consumption at 30 Cycles/mn at 4 Bar (60 psi) 1.9 m³/h (cfm) Displacement Per Cycle 18 (1.09) cc (cubic inch) Motor Type 340-2   Air Inlet F3/8" BSP   Fluid Outlet M 1/2" JIC   Fluid Inlet F 1/2'' BSP / M 26x125   Hard Chrome Stainless Steel, Wetted Parts ♦   Number of cycles per liter of products 55   Sealing packing lower PEHD ♦   Sealing packing upper GT cartridge with polyethylene packing ♦   Height 39.2 (15.5) cm (in) Width 27.8 (11) cm (in) Depth 15 (5.9) cm (in) Wetted parts stainless steel ♦  
Technologies
GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

Cup Lub

A pump with a lubricant-filled cup on the top of the fluid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Tampilkan Lebih Banyak

CV. BERKAH ABADI

CV. BERKAH ABADI with the concept of Total Solution is the answer of the need for quality and speed of service to customers.
Started from service, maintenance and design for the purpose of finishing and painting.
CV. BERKAH ABADI is based in central Java Magelang with vision and mission as well as global service coverage dedicated to customer satisfaction.
With sufficient technical experience CV. BERKAH ABADI is trying to give the best service to customer.
CV. BERKAH ABADI was established in th 2013 and started to grow in 2017 to become distributor of SAMES KREMLIN in Indonesia (Central & EAST Java)
to all partners / customers with the best service quality. Speed, quality of service, fastest response time, quality control and warranty is our main capital as the leading in Spray Painting Equipment Supplier and its supporting business.
Business concept CV. BERKAH ABADI is a Total Solution Bussiness Partner who has vision and mission as a partner / strategic partner that can provide satisfaction and comfort for Personal Customer or Corporate Customer.
cv. berkah abadi
cv. berkah abadi

CV. BERKAH ABADI

Turus 02/03 Tempurejo Tempuran, kab Magelang - Jawa tengah Indonesia 56161, MAGELANG
Indonesia 56161
MAGELANG
31 / 01 / 2019
BEST DEAL

Detail 10C18 Airmix® Paint Pump Compact

10C18 Airmix® Paint Pump Compact

The compact AIRMIX® painting pump ensures constant delivery and pulse free for superior finish.

 

  • Efficiency: perfect for AIRMIX® finish
  • Optimization: built with minimal parts
  • Simplicity: lowest cost of ownership
Description
  • Efficiency: perfect for AIRMIX® finish
  • Optimization: built with minimal parts
  • Simplicity: lowest cost of ownership

 

Performance

  • An optimized air motor works perfectly with an air compressor of only 0,5 HP & offers low noise level.

Productivity

  • A large foot valve is perfect to handle a large range of materials.
  • Reduced fluid section volume minimizes product and solvent losses during flushing.

Sustainability

  • No external air distributor allows 45% less part vs competitors for a better maintenance
  • 20 years of experience on component reliability
  • A closed construction decreases the risk of injuries and protect lubricant from external contamination
  • Easy coupling for a quick dissasembling.
  • Triple chrome-plated wetted parts compatible with all waterborne products.
  • Single GT seal, no throat packing maintenance, low friction & large lubricant wet cup
  • The mobile seal located on the piston ensures the mechanical cleaning of  the fluid section internal wall during the paint pump run.

 

The 10C18 Airmix® pump packages are available in either cart, stand or wall-mounted versions. Packages are available with one Xcite™ 120 bar manual Airmix® spray gun equipped with or without an 06.094 tip size and 7.5m (25ft) fluid and air hoses. 
A large variety of accessories is available for many customer needs.

 


Technical data table
Designation Value Unit: metric (US) Pressure Ratio 10/1   Maximum Fluid Pressure 60 (870) bar (psi) Maximum Air Pressure 6 (87) bar (psi) Air Consumption 1.9 (1.12) m³/h (cfm) Weight 5.3 (12) kg (lbs) Maximum Temperature 60 (140) °C (°F) Sound Level 79.4 dBa Recommended Air Pressure 2 - 5 (29 - 72.5) bar (psi) Fluid Output at 30 cycles/mn 0.54 (014) l/min (gal/mn) Fluid Output at 20 cycles/mn 0.36 (0.095) l/mn (gal/mn) Fluid Volume Per Cycle 18 (0.61) cc Free Flow Rate 1.1 (0.29) l/mn (gal/mn) Fluid Output at 15 Cycles 0.27 (0.07) l/mn Air Consumption at 30 Cycles/mn at 4 Bar (60 psi) 1.9 m³/h (cfm) Displacement Per Cycle 18 (1.09) cc (cubic inch) Motor Type 340-2   Air Inlet F3/8" BSP   Fluid Outlet M 1/2" JIC   Fluid Inlet F 1/2'' BSP / M 26x125   Hard Chrome Stainless Steel, Wetted Parts ♦   Number of cycles per liter of products 55   Sealing packing lower PEHD ♦   Sealing packing upper GT cartridge with polyethylene packing ♦   Height 39.2 (15.5) cm (in) Width 27.8 (11) cm (in) Depth 15 (5.9) cm (in) Wetted parts stainless steel ♦  
Technologies
GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

Cup Lub

A pump with a lubricant-filled cup on the top of the fluid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Tampilkan Lebih Banyak

CV. BERKAH ABADI

CV. BERKAH ABADI with the concept of Total Solution is the answer of the need for quality and speed of service to customers.
Started from service, maintenance and design for the purpose of finishing and painting.
CV. BERKAH ABADI is based in central Java Magelang with vision and mission as well as global service coverage dedicated to customer satisfaction.
With sufficient technical experience CV. BERKAH ABADI is trying to give the best service to customer.
CV. BERKAH ABADI was established in th 2013 and started to grow in 2017 to become distributor of SAMES KREMLIN in Indonesia (Central & EAST Java)
to all partners / customers with the best service quality. Speed, quality of service, fastest response time, quality control and warranty is our main capital as the leading in Spray Painting Equipment Supplier and its supporting business.
Business concept CV. BERKAH ABADI is a Total Solution Bussiness Partner who has vision and mission as a partner / strategic partner that can provide satisfaction and comfort for Personal Customer or Corporate Customer.