ALFRA Bevel Milling SKF 63 - 1
Ï The ALFRA Bevel Milling Machine was especially developed for the
preparation of welds and for the bevelling of metallic materials.
Ï Low weight, enabling the universal use on the work piece.
Ï Machine is designed for one-hand operation suitable for the milling of steel ,
chrome nickel steel, cast iron and non-ferrous heavy metals. The
machine is set at the edge of the work piece and moved with a slight pressure ( manual feed) .
Ï The construction of the milling disk, under the use of commercially available carbide milling
plates and a rotation speed of 2870 rpm, guarantees a steady bevel milling without rattling.
Ï The guide roller` s rails are made of hardened steel and guarantee convincing feed values
Ï Easy and safe operation by electronic switch-off control in the event of overstressing and reclosure preventing device.
Ï OFF-button intergrated in right handle ( Illustration) .
Ï Also suitable for the bevelling of pipes from Ø 160 mm up to Ø 390 mm by means of a special acceessory.
Ï Max. Land width 15 mm, angle adjustment 30 degree - 60 degree
Motor / Voltage : 230V AC, 50 Hz
Capacity : 1.1 kW
rotation speed : 2.870 RPM
Bevel width : 15 mm max
Bevel angle : 30< - 60<
Weight : 12.5 kg
dimension ( L x W x H) : 440 x 200 x280 mm
Bevel miling machine SKF 63-15, 230 V, complete
1. Set of tools, operation manual, transport case. : Order # 130.03.001
2. Milling disks and 6 pcs high speed inserts : Order # 130.03.002