Automatic Consolidation Oedometer/ Mesin Uji konsolidasi Terbaru * 2013
Main Features :
- PC controlled fully automatic test execution
- Pneumatic system for incremental consolidation and
one-dimensional swell tests
- Performance of 24 hours 7 days tests without interruption
and greater throughoutput of tests with a considerable
- To avoid the negative environmental discrepencies as
operator errors, non calibration etc.
- 15 kN max. capacity, 10 mm travel displacement transducer
- Real time data and graph display
- Single ACE software controlling up to 60 units
- High speed LAN network communication
This test determines the rate and magnitude of consolidation of a soil specimen restrained laterally and subjected to a
number of successive increments of vertical loads. In this automatic model, the incremental loading, in the load ( stress)
or swelling ( strain) mode, is fully automatic for a practical and accurate test execution with more reliable test results.
The ACE unit, the SHEARMATIC Automatic shear testing machine and AUTOTRIAX Automatic triaxial test systems,
are the unique equipment for the complete automation of a CST ( Consolidation, Shear, Triaxial) Soil Mechanics laboratory
in the different configurations.
General Descriptions :
The ACE, Automatic Computerized Oedometer, consists of a small and compact load frame housing two coaxial pneumatic
cylinders: the smallest one for low loads and the other for higher loads, with automatic switch off from one to the other when
needed. The load is controlled by a high precision pneumatic servo-valve. Two analogue channels: one for the displacement
transducer and the other for the load cell with closed loop feedback control. The test end can be programmed on a time or
on a step bases. The software can control from a single PC, up to 60 ACE units enabling the operator to choose from
single to multiple control. Test parameters are previously specified by the operator and set in the ACE software. Test
results are recorded and displayed in real time on the PC and calculation are performed automatically.
The test data can be processed by one of the Geo-Analysis Templates conforming to the BS or ASTM Standards.
The frame can accept all standard consolidation cells: from 50.47 to 112.80 mm dia. Consolidation cells, Geo-Analysis
templates and test software not included. See accessories. PC not included.
Technical Spesifications :
- Max. vertical load: 15 kN
- Load cell cap.: 15 kN
- Displacement transducer: 10 mm max. travel
- Max. air pressure supply: 10 bar. If the air pressure line is not
available inthe laboratory, our Air compressor model
86-D2015, 50 l cap. may be used.
- Sample dimensions: from 50.47 to 112.8 mm dia. using our
consolidation cells. See accessories.
- Software: can control up to 60 ACE units ( not included, see
- LAN connection to PC
- Test data accuracy: ± 1%
- Overall dimensions: 280x300x600 mm ( h)
- Weight approx.: 25 kg
Ordering Information :
1. Main Unit
26-WF3120 : ACE, Automatic computerized oedometer. 110-240 V, 50-60 Hz, 1 ph
2. Accessories :
To perform either standard or permeability test ( Choose base on requirement)