| Keterangan: | The XTENDEX® DVI-D Dual Link Extender via Fiber Optic Cable extends a digital flat panel display up to 330 feet away from a DVI-D dual link video source using fiber optic cable. Each DVI optical extender consists of a transmitter that connects to a computer and a receiverthat connects to a monitor.
* Supports single link and dual link by selectable function switcher.
o Supports 2560x1600 QXGA resolution for dual link devices.
o Supports 1920x1200 WUXGA resolution for single link devices.
o Supports HDTV resolutions to 1080p.
* Transmits DVI-D signal over 7-strand multimode LC fiber optic cable.
* Supports two DDC modes.
o Real mode: Uses one CAT5 cable for DDC.
o Emulation: pseudo-DDC detection function for EDID ( extended display identification data) information.
Connectors ( Transmitter and Receiver)
* One female DVI-I dual link connector.
* One female RJ45 connector
* Eight duplex LC connectors.
Dimensions
* WxDxH ( in) : 7.1x3.5x1.2 ( each – local and remote unit)
Regulatory Approvals
* CE, FCC
Power
* 110 to 220 VAC at 50 or 60 Hz via AC adapter
* Power consumption: 1.5W ( each - local and remote unit)
Environmental
* Operating Temperature: -32° F to 122° F ( 0° C to 50° C) .
* Storage Temperature: -4° F to 158° F ( -20° C to 70° C) .
Cables
* Use two FIBER-2D-LCLC-50-xxM ( 2 duplex LC 50-micron) multimode fiber optic cables to extend the receiver from the transmitter up to 330 feet ( not included) .
* Use one CAT5 cable connected between the transmitter and receiver for DDC ( not included) . |
|---|
