• dari 1204 halaman

Jual Beli Produk Produk Kertas

KATALOG Printronix T5304r Thermal Bar Code Printer 8 IPS @ 300 dpi

KATALOG Printronix T5304r Thermal Bar Code Printer 8 IPS @ 300 dpi

Produk Kertas
MEMORY DRAM 32MB standard Flash 8MB standard ( 16MB optional) PRINTING CHARACTERISTICS Print Speed T5204r-4” : 10 IPS @ 203 dpi ( 254mm/ sec) T5304r-4” : 8 IPS @ 300 dpi ( 203mm/ sec) T5206r-6” : 10 IPS @ 203 dpi ( 254mm/ sec) T5306r-6” : 8 IPS @ 300 dpi ( 203mm/ sec) T5208r-8” : 8 IPS @ 203 dpi ( 203mm/ sec) T5308r-8” : 6 IPS @ 300 dpi ( 152mm/ sec) Printing Methods Thermal transfer or direct thermal Resolution 203/ 300 dpi ( operator interchangeable) Printable Width 4.1” max ( 104mm) T5204r, T5304r 6.6” max ( 168mm) T5206r, T5306r 8.5” max ( 216mm) T5208r, T5308r RFID ENCODING ( OPTIONAL UPGRADE KIT) ( Excludes 8” printers ( T5208r/ T5308r) UHF encoder set to global frequency standards; supports EPCglobal Class 0, 0+ , 1, Gen 2 and Philips UCode 1.19 standards Operation Modes Write/ Verify/ Print - writes RFID data to tag and verifies contents are written correctly, while also printing the desired image Error Handling Modes Overstrike - when a bad RFID tag is detected, overstrikes label and applies the data to the next label Stop - when a bad tag is detected, stops the printer to allow for user intervention Statistics Tracking Tracks number of tags written to and number of bad tags detected MEDIA COMPATIBILITY Media Types Roll or fanfold Labels, tags and tickets Paper, film or synthetic stock Thermal Transfer or Direct Thermal Media Width 1.0” to 4.5” T5204r , T5304r 2.0” to 6.8” T5206r , T5306r 3.0” to 8.75” T5208r , T5308r Media Thickness 0.0025” to 0.010” Roll Core Diameter 3.0” ( 7.6 cm) Maximum Roll Diameter 8.0” ( 20.9 cm) Thermal Transfer Ribbon -Ribbon Width ( min/ max) 1.0” to 4.33” T5204r , T5304r 2.0” to 6.8” T5206r , T5306r 3.0” to 8.75” T5208r , T5308r -Maximum Ribbon Length 625m MEDIA HANDLING CHARACTERISTICS Tear-Off Individual label tear-off Tear-Off Strip Label strips tear-off Continuous Labels print continuously Cut Label cut to length Peel-Off Label peel and present ( peel-off mode requires rewind option) MEDIA HANDLING OPTIONS Rewinder Required for peel and present, not recommended for batch rewind of RFID labels Cutter Kit Cuts labels after printing specified number of labels OPERATOR CONTROLS & INDICATORS Operator Controls Off Line-On Line, Test Print, Job Select, Form Feed Menu, Cancel, Enter Message Display 32 character Indicators Off Line-On Line, Menu BAR CODE VALIDATION Optional Online Data Validation ( ODV) - verifies bar code quality, overstrikes failed bar codes, and reprints a label Compatible with RFID encoding PROGRAMMING LANGUAGES Standard Printronix Graphics Language ( PGL) Zebra Graphics Language ( ZGL) * TEC Graphics Language ( TGL) * Intermec Graphics Language ( IGL) * Sato Graphics Language ( STGL) * Datamax Graphics Language ( DGL) * XML - Extensible Mark-up Language * Printer Protocol Interpreters for ZPL, TEC, IPL, Sato and DPL with RFID commands for ZPL and Sato only Optional IPDS over Ethernet, Twinax or Coax PROTOCOLS Optional Telnet TN5250/ TN3270 INTERFACES Standard RS232 Serial IEEE 1284 ( Centronics) USB 2.0 Optional Ethernet ( supports PrintNet Enterprise and PXML) Wireless ( 802.11b) ( supports PrintNet Enterprise and PXML) Coax/ Twinax GPIO ( General Purpose Input/ Output) FONTS, GRAPHICS SUPPORT, WINDOWS DRIVERS Fonts OCRA, OCRB, Courier, Letter Gothic, CG Times, CG Triumvirate, CG Triumvirate Bold, CG Triumvirate Bold Condensed Character Set Unicode with TrueType font support Graphic Support PCX, BMP and TIFF file formats Windows Drivers Microsoft Windows NT/ 2000/ XP POWER REQUIREMENTS Line Input 90-264 VAC ( 48-62Hz) PFC Power Consumption 150 watts ( typical) Regulatory Compliance FCC-B, UL, CSA, ETSI EN 300 220, CE ENVIRONMENTAL CONSIDERATIONS Operatin
Hubungi Kami
Min. Order
1 buah


    Jakarta Timur • DKI Jakarta • Indonesia