Hi, Guest!
  • dari 101273 halaman
Acrylic Vacuum Desiccator YB-2 Type Sanplatec

Acrylic Vacuum Desiccator YB-2 Type Sanplatec

Perlengkapan Laboratorium
Specification       Model     (YB-1) YB-2 (YB-3) Outside dimensions (mm) 435W x 331D x 380H 435W x 331D x 480H 445W x 341D x 590H Usable inside dimensions (mm) 220W x 240D x 260H 220W x 240D x 360H 220W x 240D x 460H Vacuum gauge  One piece; For 0 to -0.1 MPa Valves  2 pieces; Nozzle diameter 9mm Packing  Made of silicon     Rack shelves 2 racks as accessories 3 racks as accessories 4 racks as accessories weight  Approx. 16kg  Approx. 18kg  Approx. 26kg   Aman udara sesak melalui ikatan tingkat tinggi. Rak rak dapat ditambahkan atau dikurangi memungkinkan Anda untuk menambah atau mengurangi jumlah rak rak untuk kebutuhan khusus Anda. YB-1 Jenis: Hingga 4 tingkat, YB-2 Jenis: Hingga 6 tingkat, YB-3. Jenis: Up to 8 tingkat * Power supply 100V diatur di dalam wadah.Untuk informasi lebih lanjut, silahkan hubungi :Distributor, Agent, Penjualan, Pemasangan dan Training. Jakarta - Indonesia, PT. Anugrah Niaga Mandiri.Hubungi Kami :Irfan   ( 0816 1337 337 ) , ( 081317103376 ).     : Tia ( 081617408900 ).Alamat   : Jl.Radin Inten II No.61 A, Duren Sawit, Jakarta Timur.Telp       : + 62-21 8690 6782, + 62-21 8690 6783.Fax        : + 62-21 8690 6781.Email     : sales@ anm.co.id.Website : www.anm.co.id. / www.alatlabor.com
Harga
Hubungi Kami
Min. Order
1 buah

  • PT. ANUGRAH NIAGA MANDIRI ( Specialist In General Laboratory, Laboratory Glassware, research laboratory, Student Laboratory and Chemical )

    Jakarta Timur • DKI Jakarta • Indonesia
Binder Drying Oven Model FD 56

Binder Drying Oven Model FD 56

Perlengkapan Laboratorium
BINDER ED Drying ovens are ideal for sterilization, drying, and thermal storage tasks which do not require high drying rates or special time parameters. BINDER ovens provide fast uniform drying for drying and sterilization applications. The Advanced Preheating Technology (APT.line™) provides temperature accuracy of 1°C with a wide temperature range 5°C above ambient to 300 °C. With the natural convection and high rate of air exchange, thermal process run with increased efficiency. Feature 1) without a viewing window 2) To 98% of the set value   All technical data are specified for units with standard equipment at an ambient temperature of +25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time. Spesification ED 53   Exterior dimensions     Width (mm) 635   Height (incl. feet) (mm) 620   Depth (mm) 575   Plus door handle and connection (mm) 105   Wall clearance, rear (mm) 100   Wall clearance, side (mm) 160   Exhaust duct (outer Ø mm) 52   Steam space volume (l) 70   Number of doors (ea.) 1       Interior dimensions     Width (mm) 400   Height (mm) 400   Depth (mm) 350   Interior volume (l) 53   Racks (number standard/max.) 2 / 5   Load per rack (kg) 15   Permitted total load (kg) 40   Weight (empty) (kg) 42   Temperature data     Temperature range approx. 5 °C above ambient temperature to (°C) 300   Temperature variation 1)     at 70 °C (± K) 2   at 150 °C (± K) 3,2   at 300 °C (± K) 4,5   Temperature fluctuation at 70 °C (± K) 0,3   Warm-up time 2)     to 70 °C (min.) 14   to 150 °C (min.) 27   to 250 °C (min.) 61   Recovery time after doors were open for 30 sec. 2)     at 70 °C (min.) 2   at 150 °C (min.) 6   at 300 °C (min.) 11       Ventilation data     Ventilation     at 70 °C (x/h) 8   at 150 °C (x/h) 19   at 300 °C (x/h) 20       Electrical data     IP protection class acc. to EN 60529 IP 20   Voltage (± 10%) 50 / 60 Hz (V) 230,1N~   Nominal power (kW) 1,2   Energy consumption  at 70 °C (W) 60   at 150 °C (W) 210   at 300 °C (W) 600.Untuk informasi lebih lanjut, silahkan hubungi :Distributor, Agent, Penjualan, Pemasangan dan Training. Jakarta - Indonesia, PT. Anugrah Niaga Mandiri.Hubungi Kami :Irfan   ( 0816 1337 337 ) , ( 081317103376 ).    : Tia ( 081617408900 ).Alamat   : Jl.Radin Inten II No.61 A, Duren Sawit, Jakarta Timur.Telp       : + 62-21 8690 6782, + 62-21 8690 6783.Fax        : + 62-21 8690 6781.Email     : sales@anm.co.id.Website : www.anm.co.id. / www.alatlabor.com.
Harga
Hubungi Kami
Min. Order
1 buah

  • PT. ANUGRAH NIAGA MANDIRI ( Specialist In General Laboratory, Laboratory Glassware, research laboratory, Student Laboratory and Chemical )

    Jakarta Timur • DKI Jakarta • Indonesia
Binder Drying Oven Model Ed 53

Binder Drying Oven Model Ed 53

Perlengkapan Laboratorium
BINDER ED Drying ovens are ideal for sterilization, drying, and thermal storage tasks which do not require high drying rates or special time parameters. BINDER ovens provide fast uniform drying for drying and sterilization applications. The Advanced Preheating Technology (APT.line™) provides temperature accuracy of 1°C with a wide temperature range 5° C above ambient to 300 °C. With the natural convection and high rate of air exchange, thermal process run with increased efficiency. Feature 1) without a viewing window 2) To 98% of the set value   All technical data are specified for units with standard equipment at an ambient temperature of +25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time. Spesification ED 53   Exterior dimensions     Width (mm) 635   Height (incl. feet) (mm) 620   Depth (mm) 575   Plus door handle and connection (mm) 105   Wall clearance, rear (mm) 100   Wall clearance, side (mm) 160   Exhaust duct (outer Ø mm) 52   Steam space volume (l) 70   Number of doors (ea.) 1       Interior dimensions     Width (mm) 400   Height (mm) 400   Depth (mm) 350   Interior volume (l) 53   Racks (number standard/max.) 2 / 5   Load per rack (kg) 15   Permitted total load (kg) 40   Weight (empty) (kg) 42  Temperature data     Temperature range approx. 5 °C above ambient temperature to (°C) 300   Temperature variation 1)     at 70 °C (± K) 2   at 150 °C (± K) 3,2   at 300 °C (± K) 4,5   Temperature fluctuation at 70 °C (± K) 0,3   Warm-up time 2)     to 70 °C (min.) 14   to 150 °C (min.) 27   to 250 °C (min.) 61   Recovery time after doors were open for 30 sec. 2)     at 70 °C (min.) 2   at 150 °C (min.) 6   at 300 °C (min.) 11       Ventilation data     Ventilation     at 70 °C (x/h) 8   at 150 °C (x/h) 19   at 300 °C (x/h) 20       Electrical data     IP protection class acc. to EN 60529 IP 20   Voltage (± 10%) 50 / 60 Hz (V) 230,1N~   Nominal power (kW) 1,2   Energy consumption  at 70 °C (W) 60   at 150 °C (W) 210   at 300 °C (W) 600.Untuk informasi lebih lanjut, silahkan hubungi :Distributor, Agent, Penjualan, Pemasangan dan Training. Jakarta - Indonesia, PT. Anugrah Niaga Mandiri.Hubungi Kami :Irfan   ( 0816 1337 337 ) , ( 081317103376 ).    : Tia ( 081617408900 ).Alamat  : Jl.Radin Inten II No.61 A, Duren Sawit, Jakarta Timur.Telp      : + 62-21 8690 6782, + 62-21 8690 6783.Fax        : + 62-21 8690 6781.Email     : sales@anm.co.id.Website : www.anm.co.id.
Harga
Hubungi Kami
Min. Order
1 buah

  • PT. ANUGRAH NIAGA MANDIRI ( Specialist In General Laboratory, Laboratory Glassware, research laboratory, Student Laboratory and Chemical )

    Jakarta Timur • DKI Jakarta • Indonesia
Erlenmeyer Flask

Erlenmeyer Flask

Perlengkapan Laboratorium
Erlenmeyer is a widely used type of instrument which features a flat, conical body, and a cylindrical neck.   FLASK, ERLENMEYER                 Volume (ml) Size (mm) OD X H X Neck O PCS/CASE   25 42 x 70 x22 10   50 52 x 82 x 22 10   100 65 x 110 x 28 72   200 81 x 131 x 31 48   250 85 x 140 x 34 60   300 91 x 150 x 31 24   500 108 x 173 x 37 24   1000 133 x 215 x 45 6   2000 172 x 270 x 50 6   3000 192 x 305 x 50 6   5000 226 x 350 x 55 6.   FLASK, ERLENMEYER without TS Glass Stopper Volume (ml)   TS Stopper  PCS/CASE    25  No. 16  10    50  No. 22  10    100  No. 22  10    200  No. 27 2    250  No. 27  2    300  No. 27  2    500  No. 27  2    1000  No. 38  2.   FLASK, ERLENMEYERwith TS Glass Stopper (ISO, K-6) Volume (ml) TS Stopper PCS/CASE    50  19/26  10    100  24/29  10    200  29/32  2    250  29/32  2    300  29/32  2    500  34/35  2   1000  34/35  2.   FLASK, ERLENMEYERwithout TS Glass Stopper (ISO, K-6) Volume (ml) TS Stopper PCS/CASE   50  19/26 10   100 24/29 10   200 29/32 2   250 29/32 2   300 29/32 2   500 34/35 2   1000 34/35 2.   FLASK, ERLENMEYER with Screw Cap Volume (ml) Cap Size PCS/CASE   50  GCMI 410-24  60    100  GCMI 410-28  10    200  GCMI 410-28  2   300  GCMI 410-28  2    500  GCMI 430-33  30    1000  GCMI 430-38  20.   SCREW CAP Cap Sizewith TEFLON liner Volume (ml) Cap Size PCS/CASE     GCMI 410-24 200     GCMI 410-28 100     GCMI 430-33 50     GCMI 430-38 50.   FLASK, IODINE with Glass Stopper (ISO, K-6) Volume (ml) TS Stopper Size PCS/CASE   100 24/29 1   300 24/29 1   500 29/32 1.   FLASK, CULTURE Rimless, Long Neck Volume (ml) OD X H X Neck PCS/CASE   100 65 x 125 x 25 12   200 81 x 146 x 38 12   300 91 x 165 x 38 12   500 108 x 188 x 38 12.   TEST TUBE, CULTURE Flat bottom, without rim Volume (ml) OD X L X t PCS/CASE     25 x 100 x 1.2 100     25 x 120 x 1.2 100     25 x 150 x 1.2 100     30 x 120 x 1.5 100     40 x 130 x 2.0 100.   P.P. Clear for Flask, Culture &  Test Tube, Culture Volume (ml) Neck Size PCS/CASE     For 25 O 1000     For 30 O 1000     For 38 O 100     For 40 O 100.Untuk informasi lebih lanjut, silahkan hubungi :Distributor, Agent, Penjualan, Pemasangan dan Training. Jakarta - Indonesia, PT. Anugrah Niaga Mandiri.Hubungi Kami :Irfan   ( 0816 1337 337 ) , ( 081317103376 ).    : Tia ( 081617408900 ).Alamat   : Jl.Radin Inten II No.61 A, Duren Sawit, Jakarta Timur.Telp       : + 62-21 8690 6782, + 62-21 8690 6783.Fax        : + 62-21 8690 6781.Email     : sales@anm.co.id.Website : www.anm.co.id.
Harga
Hubungi Kami
Min. Order
1 buah

  • PT. ANUGRAH NIAGA MANDIRI ( Specialist In General Laboratory, Laboratory Glassware, research laboratory, Student Laboratory and Chemical )

    Jakarta Timur • DKI Jakarta • Indonesia
Desain lAMELLA Clarifier

Desain lAMELLA Clarifier

Pengolahan Air
Lamela Clarifier is a water treatment process that features a rack of inclined metal plates, which cause flocculated material to precipitate from water that flows across the plate Inclined plate settlers or lamellaR clarifiers are primarily used in the water, and wastewater treatment industries to separate solids from liquids in effluent streams. The clarifier is the third step in what is usually a four step process for water and wastewater treatment. In wastewater treatment the four main steps are collection and homogenization of effluent, pH adjustment, clarification, and sludge dewatering . Conventional clarification equipment requires a much larger surface footprint in order to match the solids removal capacity of a lamella clarifierR. This is accomplished because the effective gravity settling area of the inclined plate design is proportional to the total surface area of the inclined plate rack. Loading rates normally used for the design of conventional settlers can be applied to the sizing of a Lamella clarifier/ settler by substituting projected area for the surface settling area of a conventional clarifier The compact design essentially eliminates any hydraulic disturbances caused by wind or temperature changes that may be problematic with conventional clarifiers located outdoors. Balanced flowdistribution ensures equal flow to each plate and across the plate surface area, preventing short-circuiting.Units and plate packs arrive at the job site factory assembled which reduces installation time and lowers installed costs. Minimal moving parts means low maintenance costs.     Hubungi kami, PT KIMPO INDOTAMA Jakarta Office: Jl. Daan Mogot Raya KM 21. Komplek Ruko Arcadia Blok H12 No. 3 Batu Ceper Tangerang - Banten. Phone: 021 29006750 Palembang Office: Jl. Residen A Rozak No.5, RT/RW 01/01, Kel. Kalidoni, Kec. Kalidoni Palembang. Phone: 0711 5571765 Marketing: 081279723388 / 081279713388 0821 85768889 & 0822 79499933 email: marketing@kimpoindotama.comwebsite: www.kimpoindotama.com
Harga
Hubungi Kami
Min. Order
1 buah

  • PT. KIMPO INDO TAMA.

    jakarta • DKI Jakarta • Indonesia
  • dari 101273 halaman